A Gazetteer for the United States and Canada
Census Data for Thomasville ...
The most recent Census Estimate<1> was for 2017 and it gave Thomasville a population of 3,943 people.
The last Decennial Census<2> was in 2010, which gave Thomasville a population of 4,209 people.
The city of Thomasville is located in Clarke County. The 2010 Census gave Clarke County a population of 25,833 people. This means that Thomasville had 16.29% of the county's total population, making it Clarke's 2nd most populous community.
When the Census Bureau conducts a census for a city like Thomasville, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
Things like the population, area and housing for Thomasville reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Thomasville might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Thomasville has a total area of 8.73 square miles [22.6 km²].
Clarke County has a land area of 1,238 square miles [3,207.6 km²]. At 8.73 square miles [22.6 km²], Thomasville has 0.7% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 31° 54' 39" (or 31.91°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (4,209 people) and land area (8.73 square miles [22.6 km²]) values from the 2010 Census, Thomasville had a population density of 482.3 people per square mile [186.2 people/km²].
In comparison, the 2000 Census shows Thomasville had a population of 4,649 people and a land area of 8.75 square miles [22.7 km²]. This gives a population density of 531 people per square mile [205.2 people/km²]
NOTE: Be aware that when comparing population density between the 2000 and the 2010 Census, there were changes in the sampling area for Thomasville. You need to be careful when making such a comparison, the differences are likely to lead to an apple-to-oranges comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Thomasville had 1,983 Housing Units<3> and with its population of 4,209 people, this averages 2.12 people per Housing Unit.
The 2010 Census shows Thomasville had a land area of 8.73 square miles [22.6 km²]. This translates to 227.2 Housing Units per square mile [87.7 housing units/km²].
From the Census of 2000: Thomasville had 2,052 Housing Units, a population of 4,649 people and a land area of 8.75 square miles [22.7 km²]. This gives a density of 2.27 people per Housing Unit and 234.5 Housing Units per square mile [90.6 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Thomasville and you need to be careful when comparing values between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
Clarke County ...
Thomasville is located in Clarke County.
The county had a population of 25,833 people at the 2010 Census. With it's population of 4,209 people, Thomasville represented 16.29% of the county's total.
In addition, where the city of Thomasville has a population density of 482.3 people per square mile [186.2 people/km²], Clarke County averages 20.86 people per square mile [8.05 people/km²].
For more information, please visit our Census Page for Clarke County.
Population Rings for Thomasville ...
To help identify the number of people who live in Thomasville and the surrounding area, we have drawn concentric rings centered on Thomasville. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Thomasville, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Thomasville. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.
The 2010 Census shows that the total area for Thomasville was 8.73 square miles [22.6 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 8.75 square miles [22.7 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Thomasville, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Thomasville.
For the 2010 Census, the location was given as:
Lat: 31.911085° (or 31°54'39" N) [Map]
For the 2000 Census, the location given was:
Lat: 31.911296° (or 31°54'40" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 565 feet to the west<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2405583) to Thomasville. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Thomasville. The GNIS point has been mapped to the latitude/longitude:
Lat: 31.910860° (or 31°54'39" N) [Map]
The GSP location given for the 2010 Census lies 86.9 feet to the north<6> of the point given by the GNIS for Thomasville. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Thomasville.
Miscellaneous Information for Thomasville ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Clarke County or the city of Thomasville:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Thomasville:
GNIS ID for Thomasville: 2405583
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 01 (Alabama)
County Code: 025 (Clarke County)
Place Code: 75960 (Thomasville)
Misc. Census Codes ...
Thomasville is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
The US Postal Service ZIP Code ...
While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a city like Thomasville, it does identify addresses that are in (or near) Thomasville. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
The ZIP code for Thomasville: 36784<7>
Census ZCTA Codes ...
The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Thomasville.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Thomasville. If you can help, please contact us through our Feedback Page.
The official website for State of Alabama: https://www.alabama.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 03 Jan 2019