Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Steppville in the Atlas, the following communities of the 1890's would have been found near the current location of Steppville. The following communities are listed based on their distance, with the one closest to Steppville listed first.
- Garden City
(3 miles [4.8 km] to the south)
- Garden City is located in Cullman County
- Jump to our Gazetteer entry for Garden City
- Population from the 2020 Census: 506 people
- Gum Springs
(4 miles [6.4 km] to the east)
- Gum Springs is located in Blount County
- Jump to our Gazetteer entry for Gum Springs
- Walter
(5 miles [8 km] to the northeast)
- Walter is located in Cullman County
- Jump to our Gazetteer entry for Walter
- Bangor
(6 miles [9.7 km] to the south)
- Bangor is located in Blount County
- Jump to our Gazetteer entry for Bangor
- Phelan
(6 miles [9.7 km] to the northwest)
- Phelan is located in Cullman County
- Jump to our Gazetteer entry for Phelan
- Joy
(7 miles [11.3 km] to the east)
- Joy is located in Blount County
- Jump to our Gazetteer entry for Joy
- Blountsville
(8 miles [12.9 km] to the east)
- Blount Springs
(9 miles [14.5 km] to the south)
- Blount Springs is located in Blount County
- Jump to our Gazetteer entry for Blount Springs
- Cullman
(9 miles [14.5 km] to the northwest)
- Cleveland
(10 miles [16.1 km] to the southeast)
- Holly Pond
(10 miles [16.1 km] to the northeast)
- Simcoe
(10 miles [16.1 km] to the north)
- Simcoe is located in Cullman County
- Jump to our Gazetteer entry for Simcoe
- Trimble
(12 miles [19.3 km] to the west)
- Trimble is located in Cullman County
- Jump to our Gazetteer entry for Trimble
- Bremen
(13 miles [20.9 km] to the west)
- Reid's
(13 miles [20.9 km] to the southwest)
- Reid's is located in Blount County
- Jump to our Gazetteer entry for Reid's
- Adville
(13 miles [20.9 km] to the southeast)
- Adville is located in Blount County
- Jump to our Gazetteer entry for Adville
- Little Warrior
(13 miles [20.9 km] to the southeast)
- Little Warrior is located in Blount County
- Jump to our Gazetteer entry for Little Warrior
- Royal
(13 miles [20.9 km] to the east)
- Royal is located in Blount County
- Jump to our Gazetteer entry for Royal
- Liberty
(13 miles [20.9 km] to the east)
- Liberty is located in Blount County
- Jump to our Gazetteer entry for Liberty
- Baldwin
(13 miles [20.9 km] to the northwest)
- Baldwin is located in Cullman County
- Jump to our Gazetteer entry for Baldwin
- Tappan ‑ Historic
(14 miles [22.5 km] to the east)
- Tappan is located in Blount County
- Jump to our Gazetteer entry for Tappan
- Huldah ‑ Historic
(15 miles [24.1 km] to the east)
- Huldah is located in Blount County
- Jump to our Gazetteer entry for Huldah
- Baileyton
(15 miles [24.1 km] to the northeast)
- Arkadelphia
(16 miles [25.7 km] to the southwest)
- Arkadelphia is located in Cullman County
- Jump to our Gazetteer entry for Arkadelphia
- Linton
(16 miles [25.7 km] to the south)
- Linton is located in Jefferson County
- Jump to our Gazetteer entry for Linton
- Coaldale
(16 miles [25.7 km] to the south)
- Coaldale is located in Jefferson County
- Jump to our Gazetteer entry for Coaldale
- Selfville
(16 miles [25.7 km] to the south)
- Selfville is located in Blount County
- Jump to our Gazetteer entry for Selfville
- Brooksville
(16 miles [25.7 km] to the northeast)
- Brooksville is located in Blount County
- Jump to our Gazetteer entry for Brooksville
- Summit
(16 miles [25.7 km] to the northeast)
- Summit is located in Blount County
- Jump to our Gazetteer entry for Summit
- Logan
(16 miles [25.7 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Steppville, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |