Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Liberty (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Liberty. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Liberty is located in Blount County.
To see how the shape of Alabama's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Blount County: Cullman, Etowah, Jefferson, Marshall, Saint Clair, Walker & Winston.
Below are the counties that are near Liberty. For each of these counties, we show a sample of those communities that are closest to Liberty:
- Blount County (The home county of Liberty)
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Royal
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Royal. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Royal
- Royal is located in Blount County
- Google driving directions:
- From your current location to Royal
- From Liberty to Royal
- Huldah ‑ Historic
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Huldah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huldah
- Huldah is located in Blount County
- Craig
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Craig. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Craig
- Craig is located in Blount County
- Google driving directions:
- From your current location to Craig
- From Liberty to Craig
- Brooksville
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksville
- Brooksville is located in Blount County
- Birdie
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Birdie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birdie
- Birdie is located in Blount County
- Blountsville
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Blountsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blountsville
- Blountsville is located in Blount County
- Population from the 2020 Census: 1,657 people
- Jump to TripAdvisor's Tourism page for Blountsville <3>
- Clarence
(5 miles [8 km] to the east)
- Susan Moore
(5 miles [8 km] to the east)
- Bright Star
(5 miles [8 km] to the northeast)
- Fridays Crossing
(5 miles [8 km] to the southeast)
- Summit
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Summit
- Summit is located in Blount County
- Google driving directions:
- From your current location to Summit
- From Liberty to Summit
- Mountain Grove
(6 miles [9.7 km] to the west)
- Cullman County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Holly Pond
(7 miles [11.3 km] to the northwest)
- Baileytown
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Baileytown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Baileytown
- Baileytown is located in Cullman County
- Google driving directions:
- From your current location to Baileytown
- From Liberty to Baileytown
- Baileyton
(11 miles [17.7 km] to the northwest)
- Joppa
(13 miles [20.9 km] to the north)
- Fairview
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Cullman County
- Population from the 2020 Census: 463 people
- Berlin
(13 miles [20.9 km] to the west)
- Simcoe
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Simcoe. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Simcoe
- Simcoe is located in Cullman County
- Google driving directions:
- From your current location to Simcoe
- From Liberty to Simcoe
- Hanceville
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Hanceville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanceville
- Hanceville is located in Cullman County
- Population from the 2020 Census: 3,533 people
- Jump to TripAdvisor's Tourism page for Hanceville <3>
- White City
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Cullman County
- Garden City
(15 miles [24.1 km] to the southwest)
- East Point
(16 miles [25.7 km] to the west)
- Cullman
(19 miles [30.6 km] to the west)
- DeKalb County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Mount Zion ‑ Historic
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Mount Zion. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in DeKalb County
- Google driving directions:
- From your current location to Mount Zion
- From Liberty to Mount Zion
- Rains ‑ Historic
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Rains have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rains
- Rains is located in DeKalb County
- Rogers
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rogers. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rogers
- Rogers is located in DeKalb County
- Google driving directions:
- From your current location to Rogers
- From Liberty to Rogers
- Rodentown
(29 miles [46.7 km] to the east)
- Whiton
(30 miles [48.3 km] to the northeast)
- Etowah County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Walnut Grove
(12 miles [19.3 km] to the east)
- Altoona
(12 miles [19.3 km] to the southeast)
- Nix ‑ Historic
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Nix have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nix
- Nix is located in Etowah County
- Clear Springs ‑ Historic
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Clear Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Springs
- Clear Springs is located in Etowah County
- Gallant
(17 miles [27.4 km] to the southeast)
- Aurora
(18 miles [29 km] to the east)
- Greer ‑ Historic
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Greer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greer
- Greer is located in Etowah County
- Howelton
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Howelton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Howelton
- Howelton is located in Etowah County
- Google driving directions:
- From your current location to Howelton
- From Liberty to Howelton
- Benson ‑ Historic
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Benson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benson
- Benson is located in Etowah County
- Egypt
(20 miles [32.2 km] to the east)
- Ivalee
(21 miles [33.8 km] to the east)
- Mountainboro
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Mountainboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountainboro
- Mountainboro is located in Etowah County
- Jefferson County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Masseyline
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Masseyline have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Masseyline
- Masseyline is located in Jefferson County
- Trafford
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Trafford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trafford
- Trafford is located in Jefferson County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Trafford <3>
- Village Springs
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Village Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Village Springs
- Village Springs is located in Jefferson County
- Ayres
(26 miles [41.8 km] to the south)
- Palmerdale
(26 miles [41.8 km] to the south)
- Bradford
(27 miles [43.5 km] to the southwest)
- Clay
(28 miles [45.1 km] to the south)
- Kimberly
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Kimberly have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimberly
- Kimberly is located in Jefferson County
- Population from the 2020 Census: 3,620 people
- Jump to TripAdvisor's Tourism page for Kimberly <3>
- Majestic
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Majestic have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Majestic
- Majestic is located in Jefferson County
- Crosston
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Crosston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crosston
- Crosston is located in Jefferson County
- Pinson
(30 miles [48.3 km] to the south)
- Morris
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Morris have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morris
- Morris is located in Jefferson County
- Population from the 2020 Census: 2,182 people
- Madison County
- New Hope
(30 miles [48.3 km] to the north)
- Marshall County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Big Spring ‑ Historic
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Big Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Spring
- Big Spring is located in Marshall County
- Bowen ‑ Historic
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bowen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowen
- Bowen is located in Marshall County
- Douglas
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Douglas have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Douglas
- Douglas is located in Marshall County
- Population from the 2020 Census: 780 people
- Reedbrake ‑ Historic
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Reedbrake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reedbrake
- Reedbrake is located in Marshall County
- Askea Grove
(12 miles [19.3 km] to the north)
- Hyatt
(12 miles [19.3 km] to the northeast)
- Horton
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Horton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Horton
- Horton is located in Marshall County
- Google driving directions:
- From your current location to Horton
- From Liberty to Horton
- Arab
(14 miles [22.5 km] to the north)
- Bartlett ‑ Historic
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bartlett
- Bartlett is located in Marshall County
- Hog Jaw
(15 miles [24.1 km] to the north)
- Pine Lake Village
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Pine Lake Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Lake Village
- Pine Lake Village is located in Marshall County
- Street ‑ Historic
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Street have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Street
- Street is located in Marshall County
- Morgan County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Hulaco
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Hulaco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hulaco
- Hulaco is located in Morgan County
- Ryan Crossroads
(17 miles [27.4 km] to the north)
- Apple Grove
(20 miles [32.2 km] to the north)
- Eva
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Eva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eva
- Eva is located in Morgan County
- Population from the 2020 Census: 498 people
- Jump to TripAdvisor's Tourism page for Eva <3>
- Florette
(23 miles [37 km] to the northwest)
- Briscoe
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Briscoe. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Briscoe
- Briscoe is located in Morgan County
- Google driving directions:
- From your current location to Briscoe
- From Liberty to Briscoe
- Morgan City
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Morgan City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan City
- Morgan City is located in Morgan County
- Lacon
(27 miles [43.5 km] to the northwest)
- Valhermoso Springs
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Valhermoso Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valhermoso Springs
- Valhermoso Springs is located in Morgan County
- Former names for Valhermoso Springs:
- Chunn Springs
- White Sulphur Springs
- Jump to TripAdvisor's Tourism page for Valhermoso Springs <3>
- Falkville
(28 miles [45.1 km] to the northwest)
- Lacey's Spring
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Lacey's Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lacey's Spring
- Lacey's Spring is located in Morgan County
- Jump to TripAdvisor's Tourism page for Lacey's Spring <3>
- Leesdale
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Leesdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Leesdale
- Leesdale is located in Morgan County
- Google driving directions:
- From your current location to Leesdale
- From Liberty to Leesdale
- Saint Clair County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Whitney Junction
(20 miles [32.2 km] to the southeast)
- Steele
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Steele have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steele
- Steele is located in Saint Clair County
- Population from the 2020 Census: 1,093 people
- Jump to TripAdvisor's Tourism page for Steele <3>
- Springville
(23 miles [37 km] to the south)
- Ashville
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Ashville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashville
- Ashville is located in Saint Clair County
- Population from the 2020 Census: 2,396 people
- Jump to TripAdvisor's Tourism page for Ashville <3>
- Saint Clair Springs
(24 miles [38.6 km] to the south)
- Argo
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Argo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argo
- Argo is located in Saint Clair County
- Population from the 2020 Census: 4,278 people
- Branchville
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Saint Clair County
- Margaret
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Margaret have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Margaret
- Margaret is located in Saint Clair County
- Population from the 2020 Census: 5,287 people
- Jump to TripAdvisor's Tourism page for Margaret <3>
- Odenville
(30 miles [48.3 km] to the south)
- Turnbough Town
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Turnbough Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turnbough Town
- Turnbough Town is located in Saint Clair County
For an expanded list of the communities that are closest to Liberty, see our County-by-County Page for Liberty.
Cemeteries Near Liberty ...
Below are cemeteries that are in the vicinity of Liberty.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Liberty covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Liberty, with the one closest to Liberty listed first.
- Gibbs Chapel Cemetery
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for the Gibbs Chapel Cemetery
- Note: The GPS coordinates that we are using for the Gibbs Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Graves Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Graves Cemetery
- Note: The GPS coordinates that we are using for the Graves Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- New Lebanon Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the New Lebanon Cemetery
- Note: The GPS coordinates that we are using for the New Lebanon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Oak Grove Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Oak Grove Cemetery
- Note: The GPS coordinates that we are using for the Oak Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Alldredge Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Alldredge Cemetery
- Note: The GPS coordinates that we are using for the Alldredge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sivley Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Sivley Cemetery
- Note: The GPS coordinates that we are using for the Sivley Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Blue Ridge Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Blue Ridge Cemetery
- Note: The GPS coordinates that we are using for the Blue Ridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sheppard Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Sheppard Cemetery
- Note: The GPS coordinates that we are using for the Sheppard Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Hebron Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Mt. Hebron Cemetery
- Note: The GPS coordinates that we are using for the Mt. Hebron Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Blountsville Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Blountsville Cemetery
- Note: The GPS coordinates that we are using for the Blountsville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rock Springs Cemetery
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for the Rock Springs Cemetery
- Note: The GPS coordinates that we are using for the Rock Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hood Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Hood Cemetery
- Note: The GPS coordinates that we are using for the Hood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (451 more) ...
- Brown Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Brown Cemetery
- Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Gunter / Dickson Pioneer Cemetery
(4 miles [6.4 km] to the northeast)
- Brooksville Cemetery
(4 miles [6.4 km] to the northeast)
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that Liberty had a population of 178 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Liberty, with the one closest to Liberty listed first.
- Tappan ‑ Historic
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Tappan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tappan
- Tappan is located in Blount County
- Royal
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Royal. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Royal
- Royal is located in Blount County
- Google driving directions:
- From your current location to Royal
- From Liberty to Royal
- Huldah ‑ Historic
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Huldah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huldah
- Huldah is located in Blount County
- Blountsville
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Blountsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blountsville
- Blountsville is located in Blount County
- Population from the 2020 Census: 1,657 people
- Jump to TripAdvisor's Tourism page for Blountsville <3>
- Brooksville
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksville
- Brooksville is located in Blount County
- Clarence
(5 miles [8 km] to the east)
- Bright Star
(5 miles [8 km] to the northeast)
- Summit
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Summit
- Summit is located in Blount County
- Google driving directions:
- From your current location to Summit
- From Liberty to Summit
- Joy
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Joy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joy
- Joy is located in Blount County
- Wynnville
(7 miles [11.3 km] to the east)
- Snead
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Snead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snead
- Snead is located in Blount County
- Population from the 2020 Census: 837 people
- Jump to TripAdvisor's Tourism page for Snead <3>
- McLarty
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for McLarty. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McLarty
- McLarty is located in Blount County
- Google driving directions:
- From your current location to McLarty
- From Liberty to McLarty
- Continue List (15 more) ...
- Holly Pond
(7 miles [11.3 km] to the northwest)
- Cleveland
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Blount County
- Population from the 2020 Census: 1,315 people
- Jump to TripAdvisor's Tourism page for Cleveland <3>
- Highmound
(8 miles [12.9 km] to the east)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Liberty. See our List of 1890's Communities around Liberty.
Newspapers Published in Liberty ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 16 newspapers that have been published in the area around Liberty.
Although we're unaware of any newspapers that were published in the immediate area of Liberty, there are papers which were published within 16 miles [25.7 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Liberty.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Liberty:
- Websites specific to Alabama
- Pages specific to Blount County
- Genealogy information for nearby counties
- Cullman County
- DeKalb County
- Etowah County
- Jefferson County
- Madison County
- Marshall County
- Morgan County
- Saint Clair County
- Cemetery Information and Directories for Alabama
Off-the-Road Links ...
Unfortunately, we don't know of a website for Liberty. If you can help, please contact us through our Feedback Page.
The official website for Blount County: www.co.blount.al.us/
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Liberty) to Point B.Our distance measurements begin at a specific point in Liberty. The point we use is located at these GPS coordinates - Latitude: 34.1113, Longitude: -86.5135 In this case, the coordinates for Liberty have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty, please let us know so that we can improve our accuracy. |