Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Swindle Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Swindle Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Swindle Cemetery. We've listed the following communities based on their distance, with the closest first.
- Oakman
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for Oakman
- Oakman is located in Walker County
- Population from the 2020 Census: 713 people
- Former names for Oakman:
- Day's Gap
- Marietta
- Jump to TripAdvisor's Tourism page for Oakman <2>
- Coal Valley
(Less than 2 miles to the northwest)- Note: We haven't been able to verify our GPS coordinates for Coal Valley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Coal Valley
- Coal Valley is located in Walker County
- Patton
(3 miles [4.8 km] to the southwest)- Jump to our Gazetteer entry for Patton
- Patton is located in Walker County
- Corona
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Corona
- Corona is located in Walker County
- Patton Junction ‑ Historic
(4 miles [6.4 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Patton Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Patton Junction
- Patton Junction is located in Walker County
- Parrish
(6 miles [9.7 km] to the east)- Jump to our Gazetteer entry for Parrish
- Parrish is located in Walker County
- Population from the 2020 Census: 929 people
- Townley
(7 miles [11.3 km] to the north) - Alta
(8 miles [12.9 km] to the southwest) - America
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for America
- America is located in Walker County
- Jasper
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Jasper
- Jasper is located in Walker County
- Population from the 2020 Census: 13,278 people
- Jump to TripAdvisor's Tourism page for Jasper <2>
- Goodsprings
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Goodsprings have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodsprings
- Goodsprings is located in Walker County
- Saragossa
(11 miles [17.7 km] to the north) - Gamble
(11 miles [17.7 km] to the north) - Berry
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Berry
- Berry is located in Fayette County
- Population from the 2020 Census: 1,086 people
- Jump to TripAdvisor's Tourism page for Berry <2>
- Cordova
(12 miles [19.3 km] to the east)- Jump to our Gazetteer entry for Cordova
- Cordova is located in Walker County
- Population from the 2020 Census: 1,820 people
- Jump to TripAdvisor's Tourism page for Cordova <2>
- Edgil
(12 miles [19.3 km] to the north) - Barney
(13 miles [20.9 km] to the east) - Dovertown
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Dovertown
- Dovertown is located in Walker County
- Camak Mills ‑ Historic
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Camak Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camak Mills
- Camak Mills is located in Walker County
- Carbon Hill
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Carbon Hill
- Carbon Hill is located in Walker County
- Population from the 2020 Census: 1,885 people
- Jump to TripAdvisor's Tourism page for Carbon Hill <2>
- Prospect
(14 miles [22.5 km] to the north) - South Lowell
(14 miles [22.5 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for South Lowell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for South Lowell
- South Lowell is located in Walker County
- Kansas
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Kansas
- Kansas is located in Walker County
- Population from the 2020 Census: 214 people
- Red Star
(15 miles [24.1 km] to the east) - Bankston
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Bankston
- Bankston is located in Fayette County
- Reeds Ferry
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Reeds Ferry
- Reeds Ferry is located in Walker County
- Red Rock
(16 miles [25.7 km] to the northeast)
Off-the-Road Links ...
The official website for Walker County: www.walkercounty.com/
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Swindle Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.7284, Longitude: -87.3967 In this case, the coordinates for the Swindle Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |