RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Alabama >> Baldwin County >> Bay Minette >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Alabama


The Commemorative Quarter for Alabama







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Bay Minette. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Bay Minette.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Bay Minette - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Baldwin County.

Our list sorts the communities in alphabetical order. There are 29 communities listed:

  • Atmore
    (19 miles [30.6 km] to the northeast)
  • Bucks
    (17 miles [27.4 km] to the northwest)
  • Calvert
    (23 miles [37 km] to the northwest)
  • Chickasaw
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chickasaw have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chickasaw
    • Chickasaw is located in Mobile County
    • Population from the 2020 Census: 5,659 people
    • Jump to TripAdvisor's Tourism page for Chickasaw <2>
  • Citronelle
    (30 miles [48.3 km] to the northwest)
  • Daphne
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Daphne have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Daphne
    • Daphne is located in Baldwin County
    • Population from the 2020 Census: 27,719 people
    • Jump to TripAdvisor's Tourism page for Daphne <2>
  • Eight Mile
    (22 miles [35.4 km] to the west)
    • Note: The GPS coordinates that we are using for Eight Mile have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eight Mile
    • Eight Mile is located in Mobile County
    • Jump to TripAdvisor's Tourism page for Eight Mile <2>
  • Fairhope
    (25 miles [40.2 km] to the south)
  • Little River
    (26 miles [41.8 km] to the north)
  • Loxley
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Loxley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Loxley
    • Loxley is located in Baldwin County
    • Population from the 2020 Census: 3,329 people
    • Jump to TripAdvisor's Tourism page for Loxley <2>
  • Malbis
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Malbis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malbis
    • Malbis is located in Baldwin County
    • Jump to TripAdvisor's Tourism page for Malbis <2>
  • McIntosh
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for McIntosh have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McIntosh
    • McIntosh is located in Washington County
    • Population from the 2020 Census: 210 people
    • Jump to TripAdvisor's Tourism page for McIntosh <2>
  • Mobile
    (20 miles [32.2 km] to the southwest)
  • Molino
    (29 miles [46.7 km] to the east)
  • Montrose
    (22 miles [35.4 km] to the south)
  • Mount Vernon
    (19 miles [30.6 km] to the northwest)
  • Perdido
    (12 miles [19.3 km] to the northeast)
  • Point Clear
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Point Clear have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point Clear
    • Point Clear is located in Baldwin County
    • Jump to TripAdvisor's Tourism page for Point Clear <2>
  • Prichard
    (20 miles [32.2 km] to the southwest)
  • Robertsdale
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Robertsdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Robertsdale
    • Robertsdale is located in Baldwin County
    • Population from the 2020 Census: 7,030 people
    • Jump to TripAdvisor's Tourism page for Robertsdale <2>
  • Saraland
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Saraland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saraland
    • Saraland is located in Mobile County
    • Population from the 2020 Census: 14,671 people
    • Jump to TripAdvisor's Tourism page for Saraland <2>
  • Satsuma
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Satsuma have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Satsuma
    • Satsuma is located in Mobile County
    • Population from the 2020 Census: 6,206 people
    • Jump to TripAdvisor's Tourism page for Satsuma <2>
  • Semmes
    (29 miles [46.7 km] to the west)
  • Silverhill
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Silverhill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silverhill
    • Silverhill is located in Baldwin County
    • Population from the 2020 Census: 1,285 people
    • Jump to TripAdvisor's Tourism page for Silverhill <2>
  • Spanish Fort
    (16 miles [25.7 km] to the southwest)
  • Stapleton
    (9 miles [14.5 km] to the south)
  • Stockton
    (9 miles [14.5 km] to the northwest)
  • Summerdale
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Summerdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Summerdale
    • Summerdale is located in Baldwin County
    • Population from the 2020 Census: 1,792 people
    • Jump to TripAdvisor's Tourism page for Summerdale <2>
  • Walnut Hill
    (15 miles [24.1 km] to the east)

The official website for Bay Minette: www.cityofbayminette.org/

The official website for Baldwin County: www.co.baldwin.al.us/

The official website for State of Alabama: https://www.alabama.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Bay Minette) to Point B.Our distance measurements begin at a specific point in Bay Minette. The point we use is located at these GPS coordinates - Latitude: 30.8828, Longitude: -87.7774       In this case, the coordinates for Bay Minette have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024