|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Adamsville. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Adamsville.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Adamsville - within 30 miles [48.3 km]<1>.
Unless noted otherwise, the following communities are located in Jefferson County.
Our list sorts the communities in alphabetical order. There are 55 communities listed:
- Adger
(17 miles [27.4 km] to the southwest)
- Alabaster
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Alabaster have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alabaster
- Alabaster is located in Shelby County
- Population from the 2020 Census: 33,701 people
- Jump to TripAdvisor's Tourism page for Alabaster <2>
- Alton
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Alton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alton
- Alton is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Alton <2>
- Bessemer
(13 miles [20.9 km] to the south)
- Birmingham
(10 miles [16.1 km] to the southeast)
- Bluff Park
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bluff Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Park
- Bluff Park is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Bluff Park <2>
- Bremen
(27 miles [43.5 km] to the north)
- Brighton
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Brighton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brighton
- Brighton is located in Jefferson County
- Population from the 2020 Census: 2,824 people
- Jump to TripAdvisor's Tourism page for Brighton <2>
- Cahaba Heights
(16 miles [25.7 km] to the southeast)
- Center Point
(15 miles [24.1 km] to the east)
- Chelsea
(25 miles [40.2 km] to the southeast)
- Clay
(21 miles [33.8 km] to the east)
- Cordova
(17 miles [27.4 km] to the northwest)
- Dolomite
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Dolomite have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dolomite
- Dolomite is located in Jefferson County
- Jump to TripAdvisor's Tourism page for Dolomite <2>
- Dora
(11 miles [17.7 km] to the northwest)
- Fairfield
(8 miles [12.9 km] to the south)
- Fultondale
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Fultondale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fultondale
- Fultondale is located in Jefferson County
- Population from the 2020 Census: 9,269 people
- Jump to TripAdvisor's Tourism page for Fultondale <2>
- Gardendale
(9 miles [14.5 km] to the northeast)
- Graysville
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Graysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graysville
- Graysville is located in Jefferson County
- Population from the 2020 Census: 2,066 people
- Jump to TripAdvisor's Tourism page for Graysville <2>
- Green Pond
(27 miles [43.5 km] to the south)
- Hayden
(23 miles [37 km] to the northeast)
- Helena
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helena
- Helena is located in Shelby County
- Population from the 2020 Census: 20,374 people
- Jump to TripAdvisor's Tourism page for Helena <2>
- Homewood
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Homewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homewood
- Homewood is located in Jefferson County
- Population from the 2020 Census: 25,174 people
- Jump to TripAdvisor's Tourism page for Homewood <2>
- Hoover
(16 miles [25.7 km] to the southeast)
- Hueytown
(12 miles [19.3 km] to the south)
- Irondale
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Irondale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irondale
- Irondale is located in Jefferson County
- Population from the 2020 Census: 13,226 people
- Jump to TripAdvisor's Tourism page for Irondale <2>
- Jasper
(24 miles [38.6 km] to the northwest)
- Kimberly
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Kimberly have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimberly
- Kimberly is located in Jefferson County
- Population from the 2020 Census: 3,620 people
- Jump to TripAdvisor's Tourism page for Kimberly <2>
- Leeds
(23 miles [37 km] to the east)
- Locust Fork
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Locust Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust Fork
- Locust Fork is located in Blount County
- Population from the 2020 Census: 1,178 people
- Jump to TripAdvisor's Tourism page for Locust Fork <2>
- Margaret
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Margaret have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Margaret
- Margaret is located in Saint Clair County
- Population from the 2020 Census: 5,287 people
- Jump to TripAdvisor's Tourism page for Margaret <2>
- Maylene
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Maylene have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maylene
- Maylene is located in Shelby County
- Jump to TripAdvisor's Tourism page for Maylene <2>
- McCalla
(17 miles [27.4 km] to the south)
- Midfield
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Midfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midfield
- Midfield is located in Jefferson County
- Population from the 2020 Census: 4,955 people
- Jump to TripAdvisor's Tourism page for Midfield <2>
- Moody
(26 miles [41.8 km] to the east)
- Mount Olive
(7 miles [11.3 km] to the northeast)
- Mountain Brook
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Mountain Brook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Brook
- Mountain Brook is located in Jefferson County
- Population from the 2020 Census: 20,034 people
- Jump to TripAdvisor's Tourism page for Mountain Brook <2>
- Mulga
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Mulga have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mulga
- Mulga is located in Jefferson County
- Population from the 2020 Census: 798 people
- Jump to TripAdvisor's Tourism page for Mulga <2>
- Oakman
(26 miles [41.8 km] to the west)
- Pelham
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Pelham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pelham
- Pelham is located in Shelby County
- Population from the 2020 Census: 24,231 people
- Jump to TripAdvisor's Tourism page for Pelham <2>
- Pinson
(16 miles [25.7 km] to the east)
- Pleasant Grove
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Grove
- Pleasant Grove is located in Jefferson County
- Population from the 2020 Census: 9,578 people
- Jump to TripAdvisor's Tourism page for Pleasant Grove <2>
- Quinton
(8 miles [12.9 km] to the northwest)
- Remlap
(25 miles [40.2 km] to the northeast)
- Springville
(30 miles [48.3 km] to the northeast)
- Sterrett
(29 miles [46.7 km] to the east)
- Sumiton
(11 miles [17.7 km] to the northwest)
- Sylvan Springs
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Sylvan Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylvan Springs
- Sylvan Springs is located in Jefferson County
- Population from the 2020 Census: 1,482 people
- Jump to TripAdvisor's Tourism page for Sylvan Springs <2>
- Tarrant
(10 miles [16.1 km] to the east)
- Trafford
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Trafford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trafford
- Trafford is located in Jefferson County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Trafford <2>
- Trussville
(20 miles [32.2 km] to the east)
- Vandiver
(26 miles [41.8 km] to the east)
- Vestavia Hills
(14 miles [22.5 km] to the southeast)
- Warrior
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Warrior have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warrior
- Warrior is located in Blount County
- Population from the 2020 Census: 3,190 people
- Jump to TripAdvisor's Tourism page for Warrior <2>
- Woodstock
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Woodstock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodstock
- Woodstock is located in Bibb County
- Population from the 2020 Census: 1,630 people
- Jump to TripAdvisor's Tourism page for Woodstock <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Adamsville. If you can help, please contact us through our Feedback Page. The official website for Jefferson County: www.jeffcointouch.com/ The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Adamsville) to Point B.Our distance measurements begin at a specific point in Adamsville. The point we use is located at these GPS coordinates - Latitude: 33.6011, Longitude: -86.9556 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|