Welcome to Holts Corner ...

Holts Corner is located in Marshall County<1>.

While we don't have a date for the founding of Holts Corner, you might get a feel for it by knowing that during our research the earliest mention that we found (so far) was in a book dated 1895.

A typical abbreviation for Holts Corner: Holts Cor. (or less commonly used: Holts Crn.)

See our Genealogy Helper Page for Holts Corner for more information about variations on the name of Holts Corner.

Holts Corner is 780 feet [238 m] above sea level.<2>.

Time Zone: Holts Corner lies in the Central Time Zone (CST/CDT) and observes daylight saving time

The area code for Holts Corner: (931)

Websites for Holts Corner ...

Chamber of Commerce:   www.marshallchamber.org/

Although we don't have any websites that are specific to Holts Corner, the following might be of interest:

Communities Also Named Holts Corner ...

Using our Gazetteer, we found another community named Holts Corner - it's located in Virginia.

For more information, see our Tidbits & Trivia Page for Holts Corner.

Communities near Holts Corner ...

We have created a list of 10 communities that are near Holts Corner.

• Franklin
  (18 miles [29 km] to the northwest)
  • Jump to our Gazetteer entry for Franklin
  • Franklin is located in Williamson County
  • Population from the 2020 Census: 85,316 people
  • Jump to TripAdvisor's Tourism page for Franklin <3>
• Spring Hill
  (13 miles [20.9 km] to the west)
  • Jump to our Gazetteer entry for Spring Hill
  • Spring Hill is located in Williamson County
  • Population from the 2020 Census: 46,152 people
  • Jump to TripAdvisor's Tourism page for Spring Hill <3>
• Columbia
  (19 miles [30.6 km] to the west)
  • Jump to our Gazetteer entry for Columbia
  • Columbia is located in Maury County
  • Population from the 2020 Census: 41,826 people
  • Jump to TripAdvisor's Tourism page for Columbia <3>
• Shelbyville
  (19 miles [30.6 km] to the southeast)
  • Jump to our Gazetteer entry for Shelbyville
  • Shelbyville is located in Bedford County
  • Population from the 2020 Census: 22,326 people
  • Jump to TripAdvisor's Tourism page for Shelbyville <3>
• Lewisburg
  (17 miles [27.4 km] to the south)
  • Jump to our Gazetteer entry for Lewisburg
  • Lewisburg is located in Marshall County
  • Population from the 2020 Census: 12,559 people
  • Jump to TripAdvisor's Tourism page for Lewisburg <3>
• Nolensville
  (17 miles [27.4 km] to the north)
  • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Nolensville
  • Nolensville is located in Williamson County
  • Population from the 2020 Census: 11,145 people
  • Jump to TripAdvisor's Tourism page for Nolensville <3>
• Thompson's Station
  (13 miles [20.9 km] to the northwest)
  • Jump to our Gazetteer entry for Thompson's Station
  • Thompson's Station is located in Williamson County
  • Population from the 2020 Census: 6,973 people
  • Former name for Thompson's Station:
  • Littlebury
  • Jump to TripAdvisor's Tourism page for Thompson's Station <3>
• McEwen ‑ Historic
  (19 miles [30.6 km] to the northwest)
  • Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for McEwen
  • McEwen is located in Williamson County
  • Estimated population in 2014: 1,699 people
• Chapel Hill
  (4 miles [6.4 km] to the south)
  • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
  • Jump to our Gazetteer entry for Chapel Hill
  • Chapel Hill is located in Marshall County
  • Population from the 2020 Census: 1,571 people
  • Jump to TripAdvisor's Tourism page for Chapel Hill <3>
• Unionville
  (7 miles [11.3 km] to the southeast)
  • Jump to our Gazetteer entry for Unionville
  • Unionville is located in Bedford County
  • Population from the 2010 Census: 1,368 people
  • Jump to TripAdvisor's Tourism page for Unionville <3>

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Holts Corner. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Holts Corner.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Holts Corner. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Holts Corner.

TripAdvisor Tourism Pages for Holts Corner ...

Looking for more information about Holts Corner? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Holts Corner, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Holts Corner.

Adding Holts Corner to Our Gazetteer ...

We originally found mention of Holts Corner in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.

From our notes, the earliest published mention we've found for Holts Corner was in the book titled Business Atlas and Shippers' Guide (1895).

For more details, see References and Mentions for Holts Corner.

Off-the-Road Links ...

Unfortunately, we don't know of a website for Holts Corner. If you can help, please contact us through our Feedback Page.

The official website for Marshall County: www.marshallcountytn.com/

The official website for State of Tennessee: https://www.tn.gov/