Welcome to Jennings Mill ...
Jennings Mill is located in Oconee County<1>.
The location of Jennings Mill has been provided by the Geographic Names Information System (ie- the GNIS).<2>
A typical abbreviation for Jennings Mill: Jennings Ml. (or less commonly used: Jennings Mll.)
See our Genealogy Helper Page for Jennings Mill for more information about variations on the name of Jennings Mill.
Jennings Mill is 740 feet [226 m] above sea level.<3>.
Time Zone: Jennings Mill lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Jennings Mill is served by one (or more) of the following area codes: (470)<4>, (678) and (770).
Communities near Jennings Mill ...
We have created a list of 10 communities that are near Jennings Mill.
- Athens
(6 miles [9.7 km] to the northeast)- Jump to our Gazetteer entry for Athens
- Athens is located in Clarke County
- Jump to TripAdvisor's Tourism page for Athens <5>
- Chamberlin
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for Chamberlin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chamberlin
- Chamberlin is located in Clarke County
- Estimated population in 2019: 30,307 people
- Winder
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for Winder
- Winder is located in Barrow County
- Population from the 2020 Census: 18,273 people
- Jump to TripAdvisor's Tourism page for Winder <5>
- Dry Pond
(19 miles [30.6 km] to the north) - Monroe
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Monroe
- Monroe is located in Walton County
- Population from the 2020 Census: 13,979 people
- Jump to TripAdvisor's Tourism page for Monroe <5>
- Jefferson
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Jefferson
- Jefferson is located in Jackson County
- Population from the 2020 Census: 12,490 people
- Jump to TripAdvisor's Tourism page for Jefferson <5>
- Commerce
(19 miles [30.6 km] to the north)- Jump to our Gazetteer entry for Commerce
- Commerce is located in Jackson County
- Population from the 2020 Census: 7,328 people
- Jump to TripAdvisor's Tourism page for Commerce <5>
- Cumberland
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for Cumberland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cumberland
- Cumberland is located in Oconee County
- Estimated population in 2019: 6,547 people
- Nicholasville
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Nicholasville
- Nicholasville is located in Walton County
- Estimated population in 2019: 3,333 people
- Watkinsville
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for Watkinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watkinsville
- Watkinsville is located in Oconee County
- Population from the 2020 Census: 2,962 people
- Jump to TripAdvisor's Tourism page for Watkinsville <5>
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Jennings Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Jennings Mill.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Jennings Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Jennings Mill.
We also have a detailed list of newspapers that have been published in the area around Jennings Mill. See our Newspapers Page for Jennings Mill.
TripAdvisor Tourism Pages for Jennings Mill ...
Looking for more information about Jennings Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Jennings Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Jennings Mill.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Jennings Mill. If you can help, please contact us through our Feedback Page.
The official website for Oconee County: www.oconeecounty.com/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Georgia's counties, including Oconee, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | The elevation is an estimate for the area around Jennings Mill - it will be higher in some places and lower in others. |
| <4> | Of the area codes for Jennings Mill, area code (470, 678) is an overlay. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |