RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Upson County >> Hannahs Mill >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Georgia


The Commemorative Quarter for Georgia







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Hannahs Mill, we use the following websites to find information relevant to Hannahs Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Hannahs Mill:
    • 32.932908, -84.349364
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Hannahs Mill
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Hannahs Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Clearwater Springs
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Clearwater Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clearwater Springs
    • Clearwater Springs is located in Pike County
  • Crest
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Crest have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crest
    • Crest is located in Upson County
  • Dog Crossing
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dog Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dog Crossing
    • Dog Crossing is located in Upson County
  • Ellerbeetown
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Ellerbeetown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellerbeetown
    • Ellerbeetown is located in Upson County
  • Jones Settlement
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Jones Settlement have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jones Settlement
    • Jones Settlement is located in Upson County
  • Lincoln Park
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Lincoln Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lincoln Park
    • Lincoln Park is located in Upson County
    • Estimated population in 2019: 1,503 people
  • Redbone Crossroads
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Redbone Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Redbone Crossroads
    • Redbone Crossroads is located in Upson County
  • Rose Hill
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Rose Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rose Hill
    • Rose Hill is located in Pike County
  • Silvertown
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Silvertown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silvertown
    • Silvertown is located in Upson County

How Far From Hannahs Mill to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Hannahs Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Hannahs Mill and extending to:

  • Thomaston, which is the Seat of Upson County, lies just to the South Southeast.
  • Atlanta, which is the State Capital of Georgia, lies 56 miles [90.1 km]<2> to the north (N). If you could walk a straight line from Hannahs Mill to Atlanta, with an average speed<3> of 2.2 miles [3.5 km] per hour, it would take most of three days to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take over two days.
  • The White House (Washington, DC) is 580 miles [933.4 km] to the northeast (NE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take just over a day, a buggy would take 23 days and walking would take 33 days.
  • The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,475 miles [10,420.5 km] and it lies to the northeast (NE).<5>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,174 miles [11,545.4 km] and it lies to the northeast (NE).<6>
  • The distance to Saint Peter's Basilica (The Vatican) is 5,054 miles [8,133.6 km] and it lies to the northeast (NE).<7>

Unfortunately, we don't know of a website for Hannahs Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Hannahs Mill) to Point B.Our distance measurements begin at a specific point in Hannahs Mill. The point we use is located at these GPS coordinates - Latitude: 32.9329, Longitude: -84.3494       In this case, the coordinates for Hannahs Mill have been provided by the Geographic Names Information System (GNIS).
<3>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<4>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Hannahs Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<5>The calculated bearing (or angle) to Jerusalem is 312.194 degrees.
<6>The calculated bearing (or angle) to Mecca is 307.494 degrees.
<7>The calculated bearing (or angle) to the Vatican is 309.465 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024