RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Columbus County >> Acme >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Acme (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Acme. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Acme is located in Columbus County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Columbus County: Bladen, Brunswick, Pender, Robeson & Horry (SC).

Below are the counties that are near Acme. For each of these counties, we show a sample of those communities that are closest to Acme:

  • Columbus County     (The home county of Acme)
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Riegelwood
      (Less than 2 miles to the northwest)
    • Delco
      (Less than 2 miles to the southwest)
      • Note: The GPS coordinates that we are using for Delco have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Delco
      • Delco is located in Columbus County
      • Jump to TripAdvisor's Tourism page for Delco <1>
    • Sandyfield
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sandyfield have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandyfield
      • Sandyfield is located in Columbus County
      • Population from the 2020 Census: 415 people
    • Byrdville
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Byrdville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Byrdville
      • Byrdville is located in Columbus County
    • Bolton
      (11 miles [17.7 km] to the west)
    • Lake Waccamaw
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Lake Waccamaw have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lake Waccamaw
      • Lake Waccamaw is located in Columbus County
      • Population from the 2020 Census: 1,392 people
      • Jump to TripAdvisor's Tourism page for Lake Waccamaw <1>
    • Hallsboro
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Hallsboro
      • Hallsboro is located in Columbus County
    • Redbug
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Redbug
      • Redbug is located in Columbus County
    • Rico
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Rico
      • Rico is located in Columbus County
    • Brunswick
      (28 miles [45.1 km] to the west)
    • Whiteville
      (28 miles [45.1 km] to the west)
    • Nakina
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Nakina
      • Nakina is located in Columbus County
    • Bug Hill
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bug Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bug Hill
      • Bug Hill is located in Columbus County
  • Bladen County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • East Arcadia
      (8 miles [12.9 km] to the northwest)
      • Jump to our Gazetteer entry for East Arcadia
      • East Arcadia is located in Bladen County
      • Population from the 2020 Census: 470 people
    • Long View
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Long View have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Long View
      • Long View is located in Bladen County
    • Kelly
      (11 miles [17.7 km] to the northwest)
      • Jump to our Gazetteer entry for Kelly
      • Kelly is located in Bladen County
    • Council
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Council
      • Council is located in Bladen County
    • White Lake
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Lake
      • White Lake is located in Bladen County
      • Population from the 2020 Census: 742 people
      • Jump to TripAdvisor's Tourism page for White Lake <1>
    • Clarkton
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarkton
      • Clarkton is located in Bladen County
      • Population from the 2020 Census: 741 people
      • Jump to TripAdvisor's Tourism page for Clarkton <1>
    • Mount Olive
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Olive
      • Mount Olive is located in Bladen County
    • Elizabethtown
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elizabethtown
      • Elizabethtown is located in Bladen County
      • Population from the 2020 Census: 3,378 people
      • Jump to TripAdvisor's Tourism page for Elizabethtown <1>
  • Brunswick County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Northwest
      (2 miles [3.2 km] to the east)
      • Jump to our Gazetteer entry for Northwest
      • Northwest is located in Brunswick County
      • Population from the 2020 Census: 806 people
    • Sandy Creek
      (3 miles [4.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sandy Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandy Creek
      • Sandy Creek is located in Brunswick County
      • Population from the 2020 Census: 319 people
    • Malmo
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Malmo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malmo
      • Malmo is located in Brunswick County
    • Phoenix
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Phoenix have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Phoenix
      • Phoenix is located in Brunswick County
    • Navassa
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Navassa have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Navassa
      • Navassa is located in Brunswick County
      • Population from the 2020 Census: 2,534 people
    • Town Creek
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Town Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Town Creek
      • Town Creek is located in Brunswick County
    • Winnabow
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Winnabow have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winnabow
      • Winnabow is located in Brunswick County
      • Jump to TripAdvisor's Tourism page for Winnabow <1>
    • Belville
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Belville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belville
      • Belville is located in Brunswick County
      • Population from the 2020 Census: 2,135 people
    • Leland
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Leland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leland
      • Leland is located in Brunswick County
      • Population from the 2020 Census: 25,647 people
      • Jump to TripAdvisor's Tourism page for Leland <1>
    • Bolivia
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Bolivia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bolivia
      • Bolivia is located in Brunswick County
      • Population from the 2020 Census: 154 people
      • Jump to TripAdvisor's Tourism page for Bolivia <1>
    • Makatoka
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Makatoka
      • Makatoka is located in Brunswick County
    • Old Town
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Town
      • Old Town is located in Brunswick County
    • Exum
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Exum have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Exum
      • Exum is located in Brunswick County
  • Duplin County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Harrells
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Harrells have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrells
      • Harrells is located in Duplin County
      • Population from the 2020 Census: 191 people
    • Safe
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Safe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Safe
      • Safe is located in Duplin County
    • Wallace
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallace
      • Wallace is located in Duplin County
      • Population from the 2020 Census: 3,859 people
      • Jump to TripAdvisor's Tourism page for Wallace <1>
  • New Hanover County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Hightsville
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Hightsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hightsville
      • Hightsville is located in New Hanover County
    • Wrightsboro
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Wrightsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrightsboro
      • Wrightsboro is located in New Hanover County
    • Castle Hayne
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Castle Hayne have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Castle Hayne
      • Castle Hayne is located in New Hanover County
      • Jump to TripAdvisor's Tourism page for Castle Hayne <1>
    • Skippers Corner
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Skippers Corner have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Skippers Corner
      • Skippers Corner is located in New Hanover County
    • Smith Creek
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Smith Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smith Creek
      • Smith Creek is located in New Hanover County
    • Wilmington
      (19 miles [30.6 km] to the southeast)
    • Kings Grant
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Kings Grant have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kings Grant
      • Kings Grant is located in New Hanover County
    • Murraysville
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Murraysville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murraysville
      • Murraysville is located in New Hanover County
    • Silver Lake
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver Lake
      • Silver Lake is located in New Hanover County
    • Windemere
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Windemere have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Windemere
      • Windemere is located in New Hanover County
    • Ogden
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Ogden have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ogden
      • Ogden is located in New Hanover County
      • Jump to TripAdvisor's Tourism page for Ogden <1>
    • Masonboro
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Masonboro have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Masonboro
      • Masonboro is located in New Hanover County
    • Myrtle Grove
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Myrtle Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Myrtle Grove
      • Myrtle Grove is located in New Hanover County
  • Pender County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Currie
      (11 miles [17.7 km] to the northeast)
    • Atkinson
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Atkinson
      • Atkinson is located in Pender County
      • Population from the 2020 Census: 366 people
      • Jump to TripAdvisor's Tourism page for Atkinson <1>
    • Rocky Point
      (19 miles [30.6 km] to the northeast)
    • Ashton
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ashton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ashton
      • Ashton is located in Pender County
    • Saint Helena
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Helena have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Helena
      • Saint Helena is located in Pender County
      • Population from the 2020 Census: 428 people
    • Burgaw
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgaw
      • Burgaw is located in Pender County
      • Population from the 2020 Census: 4,127 people
      • Jump to TripAdvisor's Tourism page for Burgaw <1>
    • Watha
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Watha have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Watha
      • Watha is located in Pender County
      • Population from the 2020 Census: 247 people
    • Brown Town
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Brown Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brown Town
      • Brown Town is located in Pender County
    • Murray Town
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Murray Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murray Town
      • Murray Town is located in Pender County
    • Hampstead
      (28 miles [45.1 km] to the east)
    • Willard
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Willard have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willard
      • Willard is located in Pender County
    • Topsail
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Topsail
      • Topsail is located in Pender County
  • Sampson County
    • The following are listed by their distance from Acme, with the one closest to Acme listed first.
    • Ivanhoe
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Ivanhoe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ivanhoe
      • Ivanhoe is located in Sampson County
    • Tomahawk
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Tomahawk have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tomahawk
      • Tomahawk is located in Sampson County

For an expanded list of the communities that are closest to Acme, see our County-by-County Page for Acme.

Newspapers Published in Acme ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 96 newspapers that have been published in the area around Acme.

Although we're unaware of any newspapers that were published in the immediate area of Acme, there are papers which were published within 22 miles [35.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Acme.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Acme:

Cemeteries Near Acme ...

Below are cemeteries that are in the vicinity of Acme.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Acme covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Acme, with the one closest to Acme listed first.

  • Scull Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Scull Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Scull Cemetery
  • Rogers Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Rogers Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rogers Cemetery
  • Sykes Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Sykes Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sykes Cemetery
  • Skipper Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Skipper Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Skipper Cemetery
  • Wells Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Wells Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wells Cemetery
  • Mt. Pleasant Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Mt. Pleasant Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
  • Lennon Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Lennon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lennon Cemetery
  • Atkinson Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Atkinson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Atkinson Cemetery
  • Long Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Long Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Long Cemetery
  • Flynn Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Flynn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Flynn Cemetery
  • Skipper Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Skipper Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Skipper Cemetery
  • Chinnis Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Chinnis Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Chinnis Cemetery
  • Continue List   (212 more) ...
    • Dew Cemetery
      (6 miles [9.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Dew Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Dew Cemetery
    • Malpass Cemetery
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Malpass Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Malpass Cemetery
    • Benton Cemetery
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Benton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Benton Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Acme in the Atlas, the following 1895 communities would have been found near the current location of Acme.

These communities are listed based on their distance from Acme, with the one closest to Acme listed first.

  • Northwest
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for Northwest
    • Northwest is located in Brunswick County
    • Population from the 2020 Census: 806 people
  • Armour
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Armour have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Armour
    • Armour is located in Columbus County
  • Freeman
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Freeman have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freeman
    • Freeman is located in Columbus County
  • Byrdville
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Byrdville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Byrdville
    • Byrdville is located in Columbus County
  • Malmo
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Malmo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malmo
    • Malmo is located in Brunswick County
  • Phoenix
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Phoenix have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Phoenix
    • Phoenix is located in Brunswick County
  • Colly
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Colly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colly
    • Colly is located in Bladen County
  • Montague
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Montague have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montague
    • Montague is located in Pender County
  • Point Caswell
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Point Caswell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point Caswell
    • Point Caswell is located in Pender County
  • Navassa
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Navassa have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Navassa
    • Navassa is located in Brunswick County
    • Population from the 2020 Census: 2,534 people
  • Currie
    (11 miles [17.7 km] to the northeast)
  • Kelly
    (11 miles [17.7 km] to the northwest)
    • Jump to our Gazetteer entry for Kelly
    • Kelly is located in Bladen County
  • Continue List   (14 more) ...
    • Bolton
      (11 miles [17.7 km] to the west)
    • Town Creek
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Town Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Town Creek
      • Town Creek is located in Brunswick County
    • Winnabow
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Winnabow have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winnabow
      • Winnabow is located in Brunswick County
      • Jump to TripAdvisor's Tourism page for Winnabow <1>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Acme. See our List of 1890's Communities around Acme.

Unfortunately, we don't know of a website for Acme. If you can help, please contact us through our Feedback Page.

The official website for Columbus County: www.columbusco.org/main

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Acme) to Point B.Our distance measurements begin at a specific point in Acme. The point we use is located at these GPS coordinates - Latitude: 34.3259, Longitude: -78.2048    
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Acme, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024