Nearby Airports

Introduction ...

When we're on the road, rather than always picking an airport that is close to our destination, we try to see if there might be another airport that would better fit our travel plans.<1> To help with your planning, the following list of airports is organized by type and proximity to Wilsondale.

Please keep in mind that these airports were chosen based on their air-distance from Wilsondale. You should check the map and see how accessible they are when considering one airport over another.

For each of the airports listed below, we've linked to websites where detailed information about the airport can be found.

Of the airports that we know about, these are some of the closest to Wilsondale.

Large Airports ...

Airborne Airpark (ILN/KILN)
(128 miles [206 km] to the northwest)
- Airport Identification Code:
  IATA: ILN ICAO: KILN
- GPS Coordinates: 39.427920, -83.792119<2>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Airborne Airpark
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Airborne Airpark
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Airborne Airpark
- From Wilsondale to Airborne Airpark
Port Columbus Intl. (CMH/KCMH)
(144 miles [231.7 km] to the north)
- Official website: https://columbusairports.com/
- Airport Identification Code:
  IATA: CMH ICAO: KCMH
- GPS Coordinates: 39.997972, -82.891889<3>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Port Columbus International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Port Columbus Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Port Columbus International Airport
- From Wilsondale to Port Columbus International Airport
Northern Kentucky Intl. (CVG/KCVG)
(147 miles [236.6 km] to the west northwest)
- Official website: https://www.cvgairport.com/
- Airport Identification Code:
  IATA: CVG ICAO: KCVG
- GPS Coordinates: 39.048837, -84.667822<4>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Cincinnati / Northern Kentucky International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Northern Kentucky Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Cincinnati / Northern Kentucky International
- From Wilsondale to Cincinnati / Northern Kentucky International
Dayton Intl. (DAY/KDAY)
(168 miles [270.4 km] to the northwest)
- Official website: www.flydayton.com/
- Airport Identification Code:
  IATA: DAY ICAO: KDAY
- GPS Coordinates: 39.902251, -84.219410<5>
  (These coordinates were provided by the FAA)
- Jump to a Google Map centered on Dayton International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Dayton Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Dayton International
- From Wilsondale to Dayton International
Morgantown Muni. (MGW/KMGW)
(174 miles [280 km] to the northeast)
- Official website: https://www.morgantownairport.com/
- Airport Identification Code:
  IATA: MGW ICAO: KMGW
- GPS Coordinates: 39.642908, -79.916314<6>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Morgantown Municipal Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Morgantown Muni.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Morgantown Municipal
- From Wilsondale to Morgantown Municipal
Louisville Intl. (SDF/KSDF)
(185 miles [297.7 km] to the west)
- Official website: https://www.flylouisville.com/
- Airport Identification Code:
  IATA: SDF ICAO: KSDF
- GPS Coordinates: 38.174086, -85.736499<7>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Louisville International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Louisville Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Louisville International Airport
- From Wilsondale to Louisville International Airport

Smaller Airports with Scheduled Flights / Air Taxi Service ...

Tri-State Airport (HTS/KHTS)
(31 miles [49.9 km] to the north northwest)
- Official website: https://www.tristateairport.com/
- Airport Identification Code:
  IATA: HTS ICAO: KHTS
- GPS Coordinates: 38.366667, -82.558028<8>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Tri-State Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Tri-State Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Tri-State Airport
- From Wilsondale to Tri-State Airport
Yeager Airport (CRW/KCRW)
(49 miles [78.9 km] to the northeast)
- Official website: https://yeagerairport.com/
- Airport Identification Code:
  IATA: CRW ICAO: KCRW
- GPS Coordinates: 38.373139, -81.593194<9>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Yeager Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Yeager Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Yeager Airport
- From Wilsondale to Yeager Airport
Raleigh County Meml. (BKW/KBKW)
(66 miles [106.2 km] to the east)
- Official website: flybeckley.com/
- Airport Identification Code:
  IATA: BKW ICAO: KBKW
- GPS Coordinates: 37.787326, -81.124164<10>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Raleigh County Memorial Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Raleigh County Meml.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Raleigh County Memorial
- From Wilsondale to Raleigh County Memorial

General Aviation Airports ...

Mingo Co. Airport (FAA ID: 4I0)
(18 miles [29 km] to the south)
- GPS Coordinates: 37.687601, -82.260973<11>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Mingo County Airport
- Current Airport Weather for Mingo Co. Airport
- Google driving directions:
- From your current location to Mingo County Airport
- From Wilsondale to Mingo County Airport
Big Sandy Rgnl. (FAA ID: K22)
(21 miles [33.8 km] to the southwest)
- Official website: https://www.bigsandyregional.com/
- GPS Coordinates: 37.751028, -82.636694<12>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Big Sandy Regional Airport
- Current Airport Weather for Big Sandy Rgnl.
- Google driving directions:
- From your current location to Big Sandy Regional
- From Wilsondale to Big Sandy Regional
Logan Co. Airport (FAA ID: 6L4)
(23 miles [37 km] to the east southeast)
- GPS Coordinates: 37.855686, -81.915883<13>
  (These coordinates were provided by the FAA)
- Jump to a Google Map centered on Logan County Airport
- Current Airport Weather for Logan Co. Airport
- Google driving directions:
- From your current location to Logan County Airport
- From Wilsondale to Logan County Airport
Pike Co. Airport (FAA ID: PBX)
(30 miles [48.3 km] to the south southwest)
- GPS Coordinates: 37.561764, -82.566389<14>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Pike County Airport
- Current Airport Weather for Pike Co. Airport
- Google driving directions:
- From your current location to Pike County Airport
- From Wilsondale to Pike County Airport
Lawrence County Airpark (ICAO: KHTW)
(33 miles [53.1 km] to the north northwest)
- Airport Identification Code: ICAO: KHTW
- GPS Coordinates: 38.419249, -82.494322<15>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Lawrence County Airpark
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Lawrence County Airpark
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Lawrence County Airpark
- From Wilsondale to Lawrence County Airpark
Belcher Rgnl. (FAA ID: 57KY)
(40 miles [64.4 km] to the south)
- GPS Coordinates: 37.369444, -82.324167<16>
  (These coordinates were provided by the FAA)
- Jump to a Google Map centered on Belcher Regional Airport
- Current Airport Weather for Belcher Rgnl.
- Google driving directions:
- From your current location to Belcher Regional
- From Wilsondale to Belcher Regional

Footnotes ...

<1>	When we are planning a trip (for example, to Wilsondale), we usually look for the obvious: the choice of airlines that fly into the airport, the number of flights, the connections we have to make, which car rentals are available, etc. We also look for sights and attractions that we might find between any given airport and our destination - we do love exploring. We're willing to fly into a more distant airport if we can get the services and amenities that we like. Even though our choice of airport might be inconvenient to others, it usually gives us a better trip.
<2>	GPS Coordinates for Airborne Airpark: Decimal: 39.42792, -83.792119 DDMMSS: 39° 25' 40", -83° 47' 31"
<3>	GPS Coordinates for Port Columbus International Airport: Decimal: 39.99797, -82.891889 DDMMSS: 39° 59' 52", -82° 53' 30"
<4>	GPS Coordinates for Cincinnati / Northern Kentucky International Airport: Decimal: 39.04883, -84.667822 DDMMSS: 39° 2' 55", -84° 40' 4"
<5>	GPS Coordinates for Dayton International Airport: Decimal: 39.90225, -84.219410 DDMMSS: 39° 54' 8", -84° 13' 9"
<6>	GPS Coordinates for Morgantown Municipal Airport: Decimal: 39.64290, -79.916314 DDMMSS: 39° 38' 34", -79° 54' 58"
<7>	GPS Coordinates for Louisville International Airport: Decimal: 38.17408, -85.736499 DDMMSS: 38° 10' 26", -85° 44' 11"
<8>	GPS Coordinates for Tri-State Airport: Decimal: 38.36666, -82.558028 DDMMSS: 38° 21' 59", -82° 33' 28"
<9>	GPS Coordinates for Yeager Airport: Decimal: 38.37313, -81.593194 DDMMSS: 38° 22' 23", -81° 35' 35"
<10>	GPS Coordinates for Raleigh County Memorial Airport: Decimal: 37.78732, -81.124164 DDMMSS: 37° 47' 14", -81° 7' 26"
<11>	GPS Coordinates for Mingo County Airport: Decimal: 37.68760, -82.260973 DDMMSS: 37° 41' 15", -82° 15' 39"
<12>	GPS Coordinates for Big Sandy Regional Airport: Decimal: 37.75102, -82.636694 DDMMSS: 37° 45' 3", -82° 38' 12"
<13>	GPS Coordinates for Logan County Airport: Decimal: 37.85568, -81.915883 DDMMSS: 37° 51' 20", -81° 54' 57"
<14>	GPS Coordinates for Pike County Airport: Decimal: 37.56176, -82.566389 DDMMSS: 37° 33' 42", -82° 33' 59"
<15>	GPS Coordinates for Lawrence County Airpark: Decimal: 38.41924, -82.494322 DDMMSS: 38° 25' 9", -82° 29' 39"
<16>	GPS Coordinates for Belcher Regional Airport: Decimal: 37.36944, -82.324167 DDMMSS: 37° 22' 9", -82° 19' 27"