Census Data for Wellsburg ...
The most recent Census Estimate<1> was for 2017 and it gives Wellsburg a population of 2,589 people.
The last Decennial Census<2> was in 2010, giving Wellsburg a population of 2,805 people.
The city of Wellsburg is located in Brooke County. The 2010 Census gave Brooke County a population of 24,069 people. This means that Wellsburg had 11.65% of the county's total population, making it Brooke's 3rd most populous community.
At the same time, West Virginia had a population of 1,852,994 people, meaning that Wellsburg had 0.15% of the total population of West Virginia - making it the state's 46th most populous community.
When the Census Bureau conducts a census for a city like Wellsburg, they draw a boundary around the area in which they are going to conduct their count - this is called a sampling area (or a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
Things like the population, area and housing for Wellsburg reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Wellsburg might be slightly different, it's best to check with the U.S. Census Bureau if you need precision.
The 2010 Census shows that the sample polygon for Wellsburg has a total area of 1.34 square miles [3.5 km²]. Of this total, 0.98 square miles [2.5 km²] is land, with the balance (26.81%) being water (0.36 square miles [0.9 km²]).
Brooke County has a land area of 89.2 square miles [231 km²]. At 0.98 square miles [2.5 km²], Wellsburg has 1.1% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually at the center of the polygon). At the time of the 2010 Census, the sampling area was located at:
Lat: 40° 16' 51" (or 40.28°) [Map]
Lon: -80° 36' 38" (or -80.61°)
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (2,805 people) and land area (0.98 square miles [2.5 km²]) values from the 2010 Census, Wellsburg had a population density of 2,094 people per square mile [808 people/km²].
In comparison, the 2000 Census shows Wellsburg had a population of 2,891 people and a land area of 0.93 square miles [2.4 km²]. This gives a population density of 2,074 people per square mile [800 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Wellsburg. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Wellsburg had 1,463 Housing Units<3> and with its population of 2,805 people, this averages 1.92 people per Housing Unit.
The 2010 Census shows Wellsburg had a land area of 0.98 square miles [2.5 km²]. This translates to 1,092 Housing Units per square mile [421.9 housing units/km²].
From the Census of 2000: Wellsburg had 1,493 Housing Units, a population of 2,891 people and a land area of 0.93 square miles [2.4 km²]. This gives a density of 1.94 people per Housing Unit and 1,071 Housing Units per square mile [413.6 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Wellsburg and you need to be careful when comparing between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Brooke County ...
The community of Wellsburg is located in Brooke County and is the County Seat for Brooke County.
The county had a population of 24,069 people at the 2010 Census. With it's population of 2,805 people, Wellsburg represented 11.65% of the county's total.
In addition, where the city of Wellsburg has a population density of 2,094 people per square mile [808 people/km²], Brooke County averages 269.8 people per square mile [104.2 people/km²].
For more information, please visit our Census Page for Brooke County.
Population Rings for Wellsburg ...
To help identify the number of people who live in Wellsburg and the surrounding area, we have drawn concentric rings centered on Wellsburg. We counted the number of communities within each ring and summed their populations.<4>
| Radius ||No of|
|5 mi [8 km]||7||28,247||-5%|
|10 mi [16 km]||18||57,314||-5.23%|
|15 mi [24 km]||30||101,374||-5.02%|
|20 mi [32 km]||48||141,865||-4.45%|
|25 mi [40 km]||69||190,877||-4.74%|
|30 mi [48 km]||103||297,960||-3.55%|
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Wellsburg, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Wellsburg. It's important to note that from one Census to the next, the shape and location of the polygon can change.
If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 3.92% smaller than the 2000 Census.
The 2010 Census shows that the total area for Wellsburg was 1.34 square miles [3.5 km²]. Of this total, 0.98 square miles [2.5 km²] is land, with the balance (26.81%) being water (0.36 square miles [0.9 km²]).
The 2000 Census shows a total area of 1.39 square miles [3.6 km²]. Of this total, 0.93 square miles [2.4 km²] is land, with the balance (34.52%) being water (0.46 square miles [1.2 km²]).
While generally coinciding with the GPS location (latitude/longitude) of Wellsburg, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Wellsburg.
For the 2010 Census, the location was given as:
Lat: 40.280882° (or 40°16'51" N) [Map]
Lon: -80.610647° (or -80°36'38" W)
For the 2000 Census, the location given was:
Lat: 40.277370° (or 40°16'38" N) [Map]
Lon: -80.609349° (or -80°36'33" W)
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 1,330 feet to the north<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2390668) to Wellsburg. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Wellsburg. The GNIS point has been mapped to the latitude/longitude:
Lat: 40.281012° (or 40°16'51" N) [Map]
Lon: -80.610197° (or -80°36'36" W)
The GSP location given for the 2010 Census lies 133.8 feet to the west<6> of the point given by the GNIS for Wellsburg. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Wellsburg.
Miscellaneous Information for Wellsburg ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has referenced one (or more) of the following identifiers when referring to either Brooke County or the city of Wellsburg:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Wellsburg:
GNIS ID for Wellsburg: 2390668
GNIS ID for Brooke County: 1558262
GNIS ID for West Virginia: 1779805
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 54 (West Virginia)
County Code: 009 (Brooke County)
Place Code: 85324 (Wellsburg)
State & County Code: 54/009 (West Virginia / Brooke County)
State & Place Code: 54/85324 (West Virginia / Wellsburg)
Misc. Census Codes ...
Wellsburg is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Wellsburg.
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2017.|
- Return to Citation
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
- Return to Citation
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
- Return to Citation
|<4>||The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.|
- Return to Citation
|<5>||The calculated bearing (or angle) to the 2010 Census location is 15 degrees and a distance of 1,330 feet.|
- Return to Citation
|<6>||The calculated bearing (or angle) to the GNIS point is 110 degrees and a distance of 133.8 feet.|
- Return to Citation