Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Perry Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Perry Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Perry Cemetery. We've listed the following communities based on their distance, with the closest first.
- Carbon
(Less than 2 miles to the northeast)- Jump to our Gazetteer entry for Carbon
- Carbon is located in Kanawha County
- Acme
(2 miles [3.2 km] to the northwest)- Jump to our Gazetteer entry for Acme
- Acme is located in Kanawha County
- Dorothy
(4 miles [6.4 km] to the southwest)- Jump to our Gazetteer entry for Dorothy
- Dorothy is located in Raleigh County
- Eskdale
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for Eskdale
- Eskdale is located in Kanawha County
- Whitesville
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Whitesville
- Whitesville is located in Boone County
- Population from the 2020 Census: 416 people
- Former names for Whitesville:
- Jarrods Valley
- Pritchard City
- Jump to TripAdvisor's Tourism page for Whitesville <2>
- McDunn
(6 miles [9.7 km] to the northeast)- Jump to our Gazetteer entry for McDunn
- McDunn is located in Fayette County
- Elkridge
(6 miles [9.7 km] to the northeast) - Elk Run Junction
(7 miles [11.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Elk Run Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elk Run Junction
- Elk Run Junction is located in Boone County
- Janie
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Janie
- Janie is located in Boone County
- Former name for Janie:
- Mordue
- Packsville
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Packsville
- Packsville is located in Raleigh County
- Powellton
(7 miles [11.3 km] to the northeast) - Sylvester
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Sylvester
- Sylvester is located in Boone County
- Population from the 2020 Census: 133 people
- Jump to TripAdvisor's Tourism page for Sylvester <2>
- Keith
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Keith
- Keith is located in Boone County
- Montcoal
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Montcoal
- Montcoal is located in Raleigh County
- Stickney
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Stickney
- Stickney is located in Raleigh County
- Joes Creek
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Joes Creek
- Joes Creek is located in Boone County
- Orgas
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Orgas
- Orgas is located in Boone County
- Pax
(10 miles [16.1 km] to the southeast) - Roseville ‑ Historic
(10 miles [16.1 km] to the southeast) - Kimberly
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Kimberly
- Kimberly is located in Fayette County
- Coopertown
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Coopertown
- Coopertown is located in Boone County
- Ronda
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Ronda
- Ronda is located in Kanawha County
- Dry Branch
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Dry Branch
- Dry Branch is located in Kanawha County
- Naoma
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Naoma
- Naoma is located in Raleigh County
- Wriston
(11 miles [17.7 km] to the east) - Falls View
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Falls View
- Falls View is located in Fayette County
- Mount Carbon
(11 miles [17.7 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Mount Carbon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mount Carbon
- Mount Carbon is located in Fayette County
- Fosterville
(11 miles [17.7 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Fosterville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fosterville
- Fosterville is located in Boone County
- Nelson
(11 miles [17.7 km] to the west) - Milltown
(11 miles [17.7 km] to the west) - Cabot
(11 miles [17.7 km] to the west) - Prenter
(11 miles [17.7 km] to the west)
Off-the-Road Links ...
The official website for Kanawha County: www.kanawha.us/
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Perry Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.0157, Longitude: -81.4148 In this case, the coordinates for the Perry Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |