|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Concord Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Concord Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Concord Cemetery. We've listed the following communities based on their distance, with the closest first.
- Independence
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Independence. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Independence
- Independence is located in Preston County
- Newburg
(2 miles [3.2 km] to the southwest)
- Threefork Bridge
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for Threefork Bridge
- Threefork Bridge is located in Preston County
- Tunnelton
(4 miles [6.4 km] to the east)
- Gladesville
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for Gladesville
- Gladesville is located in Preston County
- Arthurdale
(6 miles [9.7 km] to the north)
- Thornton
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Thornton
- Thornton is located in Taylor County
- Heathers Run
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Heathers Run
- Heathers Run is located in Preston County
- Reedsville
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Reedsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reedsville
- Reedsville is located in Preston County
- Population from the 2020 Census: 603 people
- Jump to TripAdvisor's Tourism page for Reedsville <3>
- Kingwood
(8 miles [12.9 km] to the northeast)
- Macomber
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Macomber. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Macomber
- Macomber is located in Preston County
- Rowlesburg
(9 miles [14.5 km] to the southeast)
- Masontown
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Masontown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Masontown
- Masontown is located in Preston County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Masontown <3>
- Knottsville
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Knottsville
- Knottsville is located in Taylor County
- Grafton
(11 miles [17.7 km] to the southwest)
- Salt Lick
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Salt Lick
- Salt Lick is located in Preston County
- Albright
(11 miles [17.7 km] to the northeast)
- Hebron
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Hebron
- Hebron is located in Marion County
- Fetterman
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Fetterman
- Fetterman is located in Taylor County
- West Grafton
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for West Grafton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for West Grafton
- West Grafton is located in Taylor County
- Sandy ‑ Historic
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sandy. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sandy
- Sandy is located in Taylor County
- Kasson
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Kasson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Kasson
- Kasson is located in Barbour County
- Samaria
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Samaria
- Samaria is located in Marion County
- Yates ‑ Historic
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Yates. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Yates
- Yates is located in Taylor County
- Stone House ‑ Historic
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Stone House. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stone House
- Stone House is located in Taylor County
Off-the-Road Links ...
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Concord Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.4081, Longitude: -79.8203 In this case, the coordinates for the Concord Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|