Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Carbide, we use the following websites to find information relevant to Carbide and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Carbide
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Carbide:
- 39.539526, -80.666764
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Carbide
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Wetzel County as the starting point when you click on the link below:
- eBird sighting report for Wetzel County
- Since Carbide is near Tyler County and also Doddridge County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Tyler County
- eBird sighting report for Doddridge County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Communities Also Named Carbide ...
We found one communities that share the name Carbide.
Within West Virginia, the name Carbide is unique.
Beyond West Virginia, there is another community also named Carbide in the United States.
- Communities Elsewhere In North America ...
Curious and Interesting Names Near Carbide ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Archer
(4 miles [6.4 km] to the southeast) - Big Run
(5 miles [8 km] to the northeast) - Dale
(5 miles [8 km] to the south) - Fallen Timber ‑ Historic
(5 miles [8 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Fallen Timber. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fallen Timber
- Fallen Timber is located in Wetzel County
- Four Mile
(4 miles [6.4 km] to the northeast) - Halls Mills
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Halls Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Mills
- Halls Mills is located in Wetzel County
- King
(2 miles [3.2 km] to the south) - Kingstown
(4 miles [6.4 km] to the northeast) - Link
(5 miles [8 km] to the southwest) - Porters Falls
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Porters Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Porters Falls
- Porters Falls is located in Wetzel County
- Reader
(4 miles [6.4 km] to the northwest) - Stringtown
(6 miles [9.7 km] to the south)- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Tyler County
How Far From Carbide to ...
We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Carbide to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance<4> beginning in Carbide and extending to:
- New Martinsville, which is the Seat of Wetzel County, lies 12 miles [19.3 km]<4> to the northwest. If you could walk a straight line from Carbide to New Martinsville, with an average speed<5> of 2.2 miles [3.5 km] per hour, it would take five to six hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take nearly four hours.
- Charleston, which is the State Capital of West Virginia, lies 97 miles [156.1 km] to the south southwest (SSW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than two hours, a buggy would take three full days and walking would take 6 days.
- The White House (Washington, DC) is 199 miles [320.3 km] to the east southeast (ESE). Driving would take a little over three hours, a buggy would take 8 days and walking would take 12 days.
- The shortest distance<6> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,021 miles [9,689.9 km] and it lies to the northeast (NE).<7>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,737 miles [10,842.2 km] and it lies to the northeast (NE).<8>
- The distance to Saint Peter's Basilica (The Vatican) is 4,612 miles [7,422.3 km] and it lies to the northeast (NE).<9>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Carbide. If you can help, please contact us through our Feedback Page.
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
| <1> | If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer as a placeholder. As we find more information about that community, it will be added to our Gazetteer. Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Mile's to see Pete ... Mile's is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name. Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time. Also keep in mind that Carbide could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Carbide) to Point B.Our distance measurements begin at a specific point in Carbide. The point we use is located at these GPS coordinates - Latitude: 39.5395, Longitude: -80.6668 In this case, the coordinates for Carbide have been provided by the Geographic Names Information System (GNIS). |
| <5> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <6> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Carbide to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <7> | The calculated bearing (or angle) to Jerusalem is 310.039 degrees. |
| <8> | The calculated bearing (or angle) to Mecca is 305.981 degrees. |
| <9> | The calculated bearing (or angle) to the Vatican is 306.045 degrees. |