Blaker Mills, West Virginia

For the purpose of mapping and calculating distances, we have chosen a reference point within Blaker Mills. The point that we are using is located at these GPS coordinates - Latitude: 37.7618, Longitude: -80.6073 [Map]. In this case, the coordinates for Blaker Mills have been provided by the Geographic Names Information System (GNIS).

DMS - Degrees, Minutes, Seconds

Lat:	37° 45' 42"
Lon:	-80° 36' 26"

Name of USGS Topo Map:^<4> Asbury

Federal GNIS/FIPS Codes for Blaker Mills

GNIS ID: 1549598

FIPS State / Place Code: 54 / 08245

(For more about Federal Codes, see our Misc Page for Blaker Mills)

About Greenbrier County

The community of Lewisburg is the County Seat for Greenbrier County.

From the 2010 US Census (For more detail, see our Census Page for Greenbrier)

Population

2017:^<5>	35,287 (0.54% decrease since 2010)
2010:	35,480 (2.98% increase since 2000)
2000:	34,453

Total Area:^<6> 1,024 sq. miles [2,653.5 km²]

Housing Units:^<7> 18,980

Federal GNIS/FIPS Codes for Greenbrier

GNIS ID: 1557518

FIPS State / County Code: 54 / 025

(For more about Federal Codes, see our Misc Page for Blaker Mills)

About West Virginia

From the US Census

Population

2017:	1,815,857 (2% decrease since 2010)
2010:	1,852,994 (2.47% increase since 2000)
2000:	1,808,344

Websites for State of West Virginia

Official Website:	https://www.wv.gov/
Tourism:	https://wvtourism.com/
Parks:	https://wvstateparks.com/
Fishing:	www.wvdnr.gov/Fishing/Fishing.shtm
Hunting:	www.wvdnr.gov/hunting/hunting_regs.shtm

Federal GNIS/FIPS Codes for State of West Virginia

GNIS ID: 1779805

FIPS State: 54

(For more about Federal Codes, see our Misc Page for Blaker Mills)

Other Roadside Stops ...

Search for a Community in West Virginia

About Greenbrier County

About West Virginia

Off-the-Road Links ...

Unfortunately, we don't know of a website for Blaker Mills. If you can help, please contact us through our Feedback Page.

The official website for State of West Virginia: https://www.wv.gov/

Footnotes ...

<1>	Area code (681) is an overlay for area code (304). - Return to Citation
<2>	The elevation is an estimate for the area around Blaker Mills - it will be higher in some places and lower in others. - Return to Citation
<3>	The longitude & latitude values may not be the geographic center of Blaker Mills, rather it may be a prominent intersection or the center of population, etc. It will vary depending on the source. - Return to Citation
<4>	The USGS 7.5 Minute topographic map which includes Blaker Mills. - Return to Citation
<5>	Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2017. - Return to Citation
<6>	The area value has been supplied by the US Census Bureau and it can be different than the geographic boundaries of Blaker Mills. The value given by the Census Bureau reflects their statistical (or sampling) requirements. For example, if there is a cluster of people living just outside of the community's official boundary, the Census-defined area might be expanded to include that group. - Return to Citation
<7>	A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway). - Return to Citation





Home Page	Sitemap	Privacy Statement	Terms of Use	Feedback

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 02 Jan 2019

By John Hall