A Gazetteer for the United States and Canada
Bath, West Virginia
Census Data for Bath ...
The most recent Census Estimate<1> was for 2017 and it gave Bath a population of 602 people.
The last Decennial Census<2> was in 2010, which gave Bath a population of 624 people.
The town of Bath is located in Morgan County. The 2010 Census gave Morgan County a population of 17,541 people. This means that Bath had 3.56% of the county's total population, making it Morgan's most populous community.
When the Census Bureau conducts a census for a town like Bath, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
Things like the population, area and housing for Bath reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Bath might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Bath has a total area of 0.34 square miles [0.9 km²].
Morgan County has a land area of 229.1 square miles [593.3 km²]. At 0.34 square miles [0.9 km²], Bath has 0.15% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 39° 37' 28" (or 39.62°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (624 people) and land area (0.34 square miles [0.9 km²]) values from the 2010 Census, Bath had a population density of 1,857 people per square mile [717 people/km²].
In comparison, the 2000 Census shows Bath had a population of 663 people and a land area of 0.25 square miles [0.6 km²]. This gives a population density of 2,706 people per square mile [1,044 people/km²]
NOTE: Be aware that when comparing population density between the 2000 and the 2010 Census, there were changes in the sampling area for Bath. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Bath had 416 Housing Units<3> and with its population of 624 people, this averages 1.5 people per Housing Unit.
The 2010 Census shows Bath had a land area of 0.34 square miles [0.9 km²]. This translates to 1,238 Housing Units per square mile [478 housing units/km²].
From the Census of 2000: Bath had 379 Housing Units, a population of 663 people and a land area of 0.25 square miles [0.6 km²]. This gives a density of 1.75 people per Housing Unit and 1,546 Housing Units per square mile [597 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 Census and the 2010 Census, there were changes in the sampling area for Bath and you need to be careful when comparing values between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Morgan County ...
The community of Bath is located in Morgan County.
The county had a population of 17,541 people at the 2010 Census. With it's population of 624 people, Bath represented 3.56% of the county's total.
In addition, where the town of Bath has a population density of 1,857 people per square mile [717 people/km²], Morgan County averages 76.6 people per square mile [29.57 people/km²].
For more information, please visit our Census Page for Morgan County.
Population Rings for Bath ...
To help identify the number of people who live in Bath and the surrounding area, we have drawn concentric rings centered on Bath. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Bath, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Bath. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 37.14% larger than the 2000 Census.
The 2010 Census shows that the total area for Bath was 0.34 square miles [0.9 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 0.25 square miles [0.6 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Bath, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Bath.
For the 2010 Census, the location was given as:
Lat: 39.624722° (or 39°37'28" N) [Map]
For the 2000 Census, the location given was:
Lat: 39.625562° (or 39°37'32" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 359.7 feet to the southwest<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#1877535) to Bath. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Bath. The GNIS point has been mapped to the latitude/longitude:
Lat: 39.627315° (or 39°37'38" N) [Map]
The GSP location given for the 2010 Census lies 975 feet to the south<6> of the point given by the GNIS for Bath. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Bath.
Miscellaneous Information for Bath ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Morgan County or the town of Bath:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Bath:
GNIS ID for Bath: 1877535
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 54 (West Virginia)
County Code: 065 (Morgan County)
Place Code: 04876 (Bath)
Misc. Census Codes ...
Bath is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Bath.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Bath. If you can help, please contact us through our Feedback Page.
The official website for State of West Virginia: https://www.wv.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 21 Feb 2019