Welcome to Rantz ...
Rantz is located in Oneida County<1>.
Rantz is 1,620 feet [494 m] above sea level.<2>.
Time Zone: Rantz lies in the Central Time Zone (CST/CDT) and observes daylight saving time
Area Codes for Rantz: 715 & 534<3>
Communities near Rantz ...
We have created a list of 10 communities that are near Rantz.
- Woodruff
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for Woodruff
- Woodruff is located in Oneida County
- Harshaw
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Harshaw
- Harshaw is located in Oneida County
- Lac du Flambeau
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Lac du Flambeau
- Lac du Flambeau is located in Vilas County
- Saint Germain
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Saint Germain
- Saint Germain is located in Vilas County
- Former names for Saint Germain:
- Farmington
- Lakewood
- Newbold
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Newbold have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newbold
- Newbold is located in Oneida County
- Sayner
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Sayner
- Sayner is located in Vilas County
- Sugar Camp
(19 miles [30.6 km] to the east)
- Jump to our Gazetteer entry for Sugar Camp
- Sugar Camp is located in Oneida County
- Rhinelander
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Rhinelander
- Rhinelander is located in Oneida County
- Population from the 2020 Census: 7,637 people
- Manitowish Waters
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Manitowish Waters have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manitowish Waters
- Manitowish Waters is located in Vilas County
- Eagle River
(23 miles [37 km] to the east)
- Jump to our Gazetteer entry for Eagle River
- Eagle River is located in Vilas County
- Population from the 2020 Census: 1,582 people
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Rantz. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Rantz.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Rantz. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Rantz.
We also have a detailed list of newspapers that have been published in the area around Rantz. See our Newspapers Page for Rantz.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Rantz. If you can help, please contact us through our Feedback Page.
The official website for Oneida County: www.co.oneida.wi.gov/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | If you're interested in how the shape of Wisconsin's counties, including Oneida, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<2> | The elevation is an estimate for the area around Rantz - it will be higher in some places and lower in others. |
<3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 715 code has been Overlayed with the 534 area code. New phone numbers in the Rantz area will be assigned with one of these codes: 715 or 534. As a result, placing a call in the Rantz area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |