Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Pike Lake in the Atlas, the following communities of the 1890's would have been found near the current location of Pike Lake. The following communities are listed based on their distance, with the one closest to Pike Lake listed first.
- Hartford
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Hartford
- Hartford is located in Washington County
- Population from the 2020 Census: 15,675 people
- Cedar Lake
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cedar Lake. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cedar Lake
- Cedar Lake is located in Washington County
- Saint Lawrence
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for Saint Lawrence
- Saint Lawrence is located in Washington County
- Thompson
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Thompson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Thompson
- Thompson is located in Washington County
- Ackerville
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Ackerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ackerville
- Ackerville is located in Washington County
- Rugby Junction
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Rugby Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rugby Junction
- Rugby Junction is located in Washington County
- Cedar Creek
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Cedar Creek
- Cedar Creek is located in Washington County
- Allenton
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Washington County
- Addison
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Addison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Addison
- Addison is located in Washington County
- Mayfield
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Mayfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayfield
- Mayfield is located in Washington County
- Huilsburg
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Huilsburg
- Huilsburg is located in Dodge County
- Alderley
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Alderley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alderley
- Alderley is located in Dodge County
- Monches
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Monches have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monches
- Monches is located in Waukesha County
- Richfield
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Richfield. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Richfield
- Richfield is located in Washington County
- Estimated population in 2015: 11,530 people
- Aurora
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Aurora
- Aurora is located in Washington County
- Neosho
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Neosho
- Neosho is located in Dodge County
- Population from the 2020 Census: 543 people
- Nenno
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Nenno have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nenno
- Nenno is located in Washington County
- Lake Five
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Lake Five
- Lake Five is located in Washington County
- Jackson
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Washington County
- Population from the 2020 Census: 7,256 people
- Woodland
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Woodland
- Woodland is located in Dodge County
- North Lake
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for North Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Lake
- North Lake is located in Waukesha County
- Colgate
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Colgate have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colgate
- Colgate is located in Washington County
- Meeker
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Meeker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meeker
- Meeker is located in Washington County
- Kohlsville
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Kohlsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kohlsville
- Kohlsville is located in Washington County
- Ashippun
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Ashippun
- Ashippun is located in Dodge County
- Rockfield
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Rockfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockfield
- Rockfield is located in Washington County
- West Bend
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for West Bend
- West Bend is located in Washington County
- Population from the 2020 Census: 31,478 people
- Barton
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Barton
- Barton is located in Washington County
- Iron Ridge
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for Iron Ridge
- Iron Ridge is located in Dodge County
- Population from the 2020 Census: 884 people
Off-the-Road Links ...
The official website for Washington County: www.co.washington.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pike Lake, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |