Census Data for Ormsby
As far as we can tell, Ormsby has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Ormsby, you might be interested in some nearby communities where we do:
- Antigo
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Antigo
- Antigo is located in Langlade County
- Aniwa
(17 miles [27.4 km] to the south) - Mattoon
(20 miles [32.2 km] to the southeast) - Birnamwood
(22 miles [35.4 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Birnamwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Birnamwood
- Birnamwood is located in Shawano County
- Merrill
(22 miles [35.4 km] to the west) - White Lake
(24 miles [38.6 km] to the east)- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Langlade County
- Brokaw
(25 miles [40.2 km] to the southwest)- Note: The GPS coordinates that we are using for Brokaw have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brokaw
- Brokaw is located in Marathon County
- The population in 2018 was estimated at 245 people. This represents a 2.39% decrease since 2010.The 2010 Census gave a population of 251 people.
- Hatley
(25 miles [40.2 km] to the south)- Jump to our Gazetteer entry for Hatley
- Hatley is located in Marathon County
- Eland
(26 miles [41.8 km] to the south)- Jump to our Gazetteer entry for Eland
- Eland is located in Shawano County
- Crandon
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Crandon
- Crandon is located in Forest County
- Rhinelander
(27 miles [43.5 km] to the north)- Jump to our Gazetteer entry for Rhinelander
- Rhinelander is located in Oneida County
- Tomahawk
(27 miles [43.5 km] to the northwest)- Jump to our Gazetteer entry for Tomahawk
- Tomahawk is located in Lincoln County
- Continue List (89 more) ...
- Wausau
(27 miles [43.5 km] to the southwest)- Jump to our Gazetteer entry for Wausau
- Wausau is located in Marathon County
- Schofield
(29 miles [46.7 km] to the southwest) - Wittenberg
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Wittenberg
- Wittenberg is located in Shawano County
- Wausau
Langlade County ...
Ormsby is located in Langlade County<3>.
For more information, please visit our Census Page for Langlade County.
Miscellaneous Information for Ormsby ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Langlade County or the community of Ormsby:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 55 (Wisconsin)
- County Code: 067 (Langlade County)
- Place Code: 60365 (Ormsby)
- State & County Code: 55/067 (Wisconsin / Langlade County)
- State & Place Code: 55/60365 (Wisconsin / Ormsby)
- Misc. Census Codes ...
- Ormsby is located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Ormsby.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Ormsby. If you can help, please contact us through our Feedback Page.
The official website for Langlade County: www.co.langlade.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | If you're interested in how the shape of Wisconsin's counties, including Langlade, have changed over time, we recommend the Atlas of Historical County Boundaries. |