Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Mount Tabor had a population of 306 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Mount Tabor, with the one closest to Mount Tabor listed first.
- Trippville
(2 miles [3.2 km] to the east)
- Valley
(6 miles [9.7 km] to the southwest)
- Valley is located in Vernon County
- Jump to our Gazetteer entry for Valley
- Hillsboro
(6 miles [9.7 km] to the southeast)
- Kendall
(7 miles [11.3 km] to the northeast)
- Kendall is located in Monroe County
- Jump to our Gazetteer entry for Kendall
- Population from the 2020 Census: 472 people
- Oil City
(7 miles [11.3 km] to the northwest)
- Oil City is located in Monroe County
- Jump to our Gazetteer entry for Oil City
- Ontario
(7 miles [11.3 km] to the west)
- Ontario is located in Vernon County
- Jump to our Gazetteer entry for Ontario
- Population from the 2020 Census: 561 people
- Rockton
(8 miles [12.9 km] to the southwest)
- Rockton is located in Vernon County
- Jump to our Gazetteer entry for Rockton
- Union Center
(9 miles [14.5 km] to the east)
- Elroy
(9 miles [14.5 km] to the east)
- Elroy is located in Juneau County
- Jump to our Gazetteer entry for Elroy
- Population from the 2020 Census: 1,306 people
- West Lima
(11 miles [17.7 km] to the south)
- West Lima is located in Richland County
- Jump to our Gazetteer entry for West Lima
- Yuba
(11 miles [17.7 km] to the south)
- Yuba is located in Richland County
- Jump to our Gazetteer entry for Yuba
- Population from the 2020 Census: 69 people
- La Farge
(12 miles [19.3 km] to the southwest)
- Valton
(12 miles [19.3 km] to the southeast)
- Valton is located in Sauk County
- Jump to our Gazetteer entry for Valton
- Norwalk
(12 miles [19.3 km] to the northwest)
- Henrietta ‑ Historic
(13 miles [20.9 km] to the south)
- Henrietta is located in Richland County
- Jump to our Gazetteer entry for Henrietta
- Clifton
(13 miles [20.9 km] to the north)
- Saint Marys
(13 miles [20.9 km] to the northwest)
- Saint Marys is located in Monroe County
- Jump to our Gazetteer entry for Saint Marys
- Bloom City
(14 miles [22.5 km] to the south)
- Woodstock
(15 miles [24.1 km] to the south)
- Hustler
(15 miles [24.1 km] to the northeast)
- Bloomingdale
(16 miles [25.7 km] to the west)
- Bloomingdale is located in Vernon County
- Jump to our Gazetteer entry for Bloomingdale
- Hub City
(16 miles [25.7 km] to the south)
- Hub City is located in Richland County
- Jump to our Gazetteer entry for Hub City
- Cashton
(16 miles [25.7 km] to the west)
- Cashton is located in Monroe County
- Jump to our Gazetteer entry for Cashton
- Population from the 2020 Census: 1,111 people
- Avalanche
(17 miles [27.4 km] to the southwest)
- Avalanche is located in Vernon County
- Jump to our Gazetteer entry for Avalanche
- Viola
(17 miles [27.4 km] to the southwest)
- Rockbridge
(17 miles [27.4 km] to the south)
- Rockbridge is located in Richland County
- Jump to our Gazetteer entry for Rockbridge
- Cazenovia
(17 miles [27.4 km] to the southeast)
- Camp Douglas
(17 miles [27.4 km] to the northeast)
- Melvina
(17 miles [27.4 km] to the northwest)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mount Tabor, please let us know so that we can improve our accuracy. |