Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Lowell had a population of 304 people in 1895 with a post office and no railroad service. In 2020, Lowell had a population of 322 people.
The following communities are listed based on their distance from Lowell, with the one closest to Lowell listed first.
- Reeseville
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for Reeseville
- Reeseville is located in Dodge County
- Population from the 2020 Census: 673 people
- Clyman
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Clyman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clyman
- Clyman is located in Dodge County
- Population from the 2020 Census: 396 people
- Danville
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Danville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Danville
- Danville is located in Dodge County
- Richwood
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Richwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richwood
- Richwood is located in Dodge County
- Juneau
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Juneau
- Juneau is located in Dodge County
- Population from the 2020 Census: 2,532 people
- Beaver Dam
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Beaver Dam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver Dam
- Beaver Dam is located in Dodge County
- Population from the 2020 Census: 16,303 people
- Rolling Prairie
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Rolling Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolling Prairie
- Rolling Prairie is located in Dodge County
- Columbus
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Columbus
- Columbus is located in Columbia County
- Population from the 2020 Census: 5,117 people
- Hubbleton
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Hubbleton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbleton
- Hubbleton is located in Jefferson County
- Hustisford
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Hustisford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustisford
- Hustisford is located in Dodge County
- Population from the 2020 Census: 1,060 people
- Minnesota Junction
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Minnesota Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Minnesota Junction
- Minnesota Junction is located in Dodge County
- Lebanon
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Dodge County
- Horicon
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Horicon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horicon
- Horicon is located in Dodge County
- Population from the 2020 Census: 3,680 people
- Lost Lake
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Lost Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lost Lake
- Lost Lake is located in Dodge County
- Fall River
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Fall River
- Fall River is located in Columbia County
- Population from the 2020 Census: 1,757 people
- Burnett
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Burnett
- Burnett is located in Dodge County
- Waterloo
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Waterloo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterloo
- Waterloo is located in Jefferson County
- Population from the 2020 Census: 3,322 people
- Fox Lake Junction
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Fox Lake Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fox Lake Junction
- Fox Lake Junction is located in Dodge County
- Neosho
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Neosho
- Neosho is located in Dodge County
- Population from the 2020 Census: 543 people
- Woodland
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Woodland
- Woodland is located in Dodge County
- Iron Ridge
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Iron Ridge
- Iron Ridge is located in Dodge County
- Population from the 2020 Census: 884 people
- Atwater
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Atwater
- Atwater is located in Dodge County
- Marshall
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Marshall
- Marshall is located in Dane County
- Population from the 2020 Census: 4,016 people
- Fox Lake
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Fox Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fox Lake
- Fox Lake is located in Dodge County
- Population from the 2020 Census: 1,440 people
- Milford
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Milford
- Milford is located in Jefferson County
- Pipersville
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Pipersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pipersville
- Pipersville is located in Jefferson County
- Randolph
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randolph
- Randolph is located in Dodge County
- Population from the 2020 Census: 1,738 people
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Lowell. If you can help, please contact us through our Feedback Page.
The official website for Dodge County: www.co.dodge.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lowell, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |