Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Leola in the Atlas, the following communities of the 1890's would have been found near the current location of Leola. The following communities are listed based on their distance, with the one closest to Leola listed first.
- Hancock
(8 miles [12.9 km] to the southeast)
- Hancock is located in Waushara County
- Jump to our Gazetteer entry for Hancock
- Population from the 2020 Census: 402 people
- Plainfield
(8 miles [12.9 km] to the east)
- Plainfield is located in Waushara County
- Jump to our Gazetteer entry for Plainfield
- Population from the 2020 Census: 832 people
- Bancroft
(10 miles [16.1 km] to the northeast)
- Bancroft is located in Portage County
- Jump to our Gazetteer entry for Bancroft
- New Rome ‑ Historic
(10 miles [16.1 km] to the west)
- Roche a Cri ‑ Historic
(13 miles [20.9 km] to the southwest)
- Roche a Cri is located in Adams County
- Jump to our Gazetteer entry for Roche a Cri
- Coloma
(13 miles [20.9 km] to the southeast)
- Coloma is located in Waushara County
- Jump to our Gazetteer entry for Coloma
- Population from the 2020 Census: 444 people
- Almond
(13 miles [20.9 km] to the east)
- Pilot Knob ‑ Historic
(14 miles [22.5 km] to the south)
- Pilot Knob is located in Adams County
- Jump to our Gazetteer entry for Pilot Knob
- Keene
(14 miles [22.5 km] to the northeast)
- Keene is located in Portage County
- Jump to our Gazetteer entry for Keene
- Port Edwards
(14 miles [22.5 km] to the northwest)
- Monroe Center
(15 miles [24.1 km] to the southwest)
- Monroe Center is located in Adams County
- Jump to our Gazetteer entry for Monroe Center
- Arkdale
(16 miles [25.7 km] to the southwest)
- Richford
(16 miles [25.7 km] to the southeast)
- Richford is located in Waushara County
- Jump to our Gazetteer entry for Richford
- Meehan
(16 miles [25.7 km] to the north)
- Meehan is located in Portage County
- Jump to our Gazetteer entry for Meehan
- Friendship
(17 miles [27.4 km] to the southwest)
- Friendship is located in Adams County
- Jump to our Gazetteer entry for Friendship
- Population from the 2020 Census: 676 people
- Strongs Prairie
(18 miles [29 km] to the southwest)
- Blaine
(18 miles [29 km] to the northeast)
- Adams Center ‑ Historic
(20 miles [32.2 km] to the south)
- Adams Center is located in Adams County
- Jump to our Gazetteer entry for Adams Center
- Dakota
(20 miles [32.2 km] to the southeast)
- Dakota is located in Waushara County
- Jump to our Gazetteer entry for Dakota
- Wild Rose
(20 miles [32.2 km] to the east)
- Arnott
(20 miles [32.2 km] to the northeast)
- Walker
(20 miles [32.2 km] to the northwest)
- Walker is located in Wood County
- Jump to our Gazetteer entry for Walker
- Grand Marsh
(21 miles [33.8 km] to the south)
- Grand Marsh is located in Adams County
- Jump to our Gazetteer entry for Grand Marsh
- Rudolph
(21 miles [33.8 km] to the north)
- Rudolph is located in Wood County
- Jump to our Gazetteer entry for Rudolph
- Population from the 2020 Census: 411 people
- Fancher
(22 miles [35.4 km] to the northeast)
- Fancher is located in Portage County
- Jump to our Gazetteer entry for Fancher
- Stevens Point
(22 miles [35.4 km] to the north)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Leola, please let us know so that we can improve our accuracy. |