Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Johnstown had a population of 138 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Johnstown, with the one closest to Johnstown listed first.
- Johnstown Center
(Less than 2 miles to the west)- Jump to our Gazetteer entry for Johnstown Center
- Johnstown Center is located in Rock County
- Emerald Grove
(4 miles [6.4 km] to the southwest)- Jump to our Gazetteer entry for Emerald Grove
- Emerald Grove is located in Rock County
- Fairfield
(4 miles [6.4 km] to the south) - Lima Center
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Lima Center
- Lima Center is located in Rock County
- Allens Grove
(8 miles [12.9 km] to the south)- Jump to our Gazetteer entry for Allens Grove
- Allens Grove is located in Walworth County
- Darien
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Darien
- Darien is located in Walworth County
- Population from the 2020 Census: 1,591 people
- Milton
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Milton
- Milton is located in Rock County
- Population from the 2020 Census: 5,643 people
- Delavan
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Delavan
- Delavan is located in Walworth County
- Population from the 2020 Census: 8,240 people
- Millard
(9 miles [14.5 km] to the east) - Heart Prairie
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Heart Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heart Prairie
- Heart Prairie is located in Walworth County
- Milton Junction
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Milton Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton Junction
- Milton Junction is located in Rock County
- Tiffany
(10 miles [16.1 km] to the southwest) - Clinton
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Clinton
- Clinton is located in Rock County
- Population from the 2020 Census: 2,119 people
- Whitewater
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Whitewater
- Whitewater is located in Walworth County
- Population from the 2020 Census: 14,993 people
- Janesville
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Janesville
- Janesville is located in Rock County
- Population from the 2020 Census: 64,664 people
- Shopiere
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Shopiere
- Shopiere is located in Rock County
- Koshkonong
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Koshkonong have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Koshkonong
- Koshkonong is located in Jefferson County
- East Delavan
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for East Delavan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Delavan
- East Delavan is located in Walworth County
- Elkhorn
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Elkhorn
- Elkhorn is located in Walworth County
- Population from the 2020 Census: 10,020 people
- Lauderdale
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Lauderdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lauderdale
- Lauderdale is located in Walworth County
- Cold Spring
(13 miles [20.9 km] to the north)- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Jefferson County
- Afton
(14 miles [22.5 km] to the southwest) - Porters
(14 miles [22.5 km] to the southwest) - Sharon
(14 miles [22.5 km] to the south) - Williams Bay
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Williams Bay
- Williams Bay is located in Walworth County
- Population from the 2020 Census: 2,657 people
- Adams
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Adams
- Adams is located in Walworth County
- Fort Atkinson
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Fort Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Atkinson
- Fort Atkinson is located in Jefferson County
- Population from the 2020 Census: 12,372 people
Off-the-Road Links ...
The official website for Rock County: www.co.rock.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Johnstown, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |