Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Fitzgerald had railroad service and no post office.
The following communities are listed based on their distance from Fitzgerald, with the one closest to Fitzgerald listed first.
- Zion
(2 miles [3.2 km] to the northwest)
- Zion is located in Winnebago County
- Jump to our Gazetteer entry for Zion
- Fisk
(3 miles [4.8 km] to the southwest)
- Oshkosh
(4 miles [6.4 km] to the northeast)
- Elo
(5 miles [8 km] to the southwest)
- Elo is located in Winnebago County
- Jump to our Gazetteer entry for Elo
- Ring
(5 miles [8 km] to the south)
- Ring is located in Winnebago County
- Jump to our Gazetteer entry for Ring
- Black Wolf
(5 miles [8 km] to the southeast)
- Black Wolf is located in Winnebago County
- Jump to our Gazetteer entry for Black Wolf
- Pickett
(7 miles [11.3 km] to the southwest)
- Omro
(7 miles [11.3 km] to the northwest)
- Waukau
(7 miles [11.3 km] to the west)
- Waukau is located in Winnebago County
- Jump to our Gazetteer entry for Waukau
- Butte des Morts
(8 miles [12.9 km] to the north)
- Butte des Morts is located in Winnebago County
- Jump to our Gazetteer entry for Butte des Morts
- Van Dyne
(8 miles [12.9 km] to the southeast)
- Van Dyne is located in Fond du Lac County
- Jump to our Gazetteer entry for Van Dyne
- Winnebago
(8 miles [12.9 km] to the northeast)
- Winnebago is located in Winnebago County
- Jump to our Gazetteer entry for Winnebago
- Eldorado
(10 miles [16.1 km] to the south)
- Allenville
(10 miles [16.1 km] to the north)
- Eureka
(10 miles [16.1 km] to the west)
- Eureka is located in Winnebago County
- Jump to our Gazetteer entry for Eureka
- Rush Lake
(11 miles [17.7 km] to the west)
- Rush Lake is located in Winnebago County
- Jump to our Gazetteer entry for Rush Lake
- West Rosendale
(12 miles [19.3 km] to the southwest)
- Rosendale
(12 miles [19.3 km] to the south)
- Rosendale is located in Fond du Lac County
- Jump to our Gazetteer entry for Rosendale
- Population from the 2020 Census: 1,026 people
- Snells
(12 miles [19.3 km] to the northeast)
- Snells is located in Winnebago County
- Jump to our Gazetteer entry for Snells
- Larsen
(14 miles [22.5 km] to the north)
- Larsen is located in Winnebago County
- Jump to our Gazetteer entry for Larsen
- Ripon
(14 miles [22.5 km] to the southwest)
- Woodhull
(14 miles [22.5 km] to the south)
- Calumet Harbor
(15 miles [24.1 km] to the east)
- Calumet Harbor is located in Fond du Lac County
- Jump to our Gazetteer entry for Calumet Harbor
- Brothertown
(15 miles [24.1 km] to the east)
- Taycheedah
(16 miles [25.7 km] to the southeast)
- Taycheedah is located in Fond du Lac County
- Jump to our Gazetteer entry for Taycheedah
- Peebles
(16 miles [25.7 km] to the southeast)
- Silica
(16 miles [25.7 km] to the southeast)
- Silica is located in Fond du Lac County
- Jump to our Gazetteer entry for Silica
- Calumetville
(16 miles [25.7 km] to the east)
- Stockbridge
(16 miles [25.7 km] to the northeast)
- Stockbridge is located in Calumet County
- Jump to our Gazetteer entry for Stockbridge
- Population from the 2020 Census: 619 people
- Neenah
(16 miles [25.7 km] to the northeast)
- Berlin
(16 miles [25.7 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fitzgerald, please let us know so that we can improve our accuracy. |