Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Union Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Union Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Union Cemetery. We've listed the following communities based on their distance, with the closest first.
- Butternut
(Less than 2 miles to the south)- Jump to our Gazetteer entry for Butternut
- Butternut is located in Ashland County
- Population from the 2020 Census: 351 people
- Park Falls
(6 miles [9.7 km] to the south)- Note: The GPS coordinates that we are using for Park Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Park Falls
- Park Falls is located in Price County
- Population from the 2020 Census: 2,192 people
- Glidden
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Glidden
- Glidden is located in Ashland County
- Fifield
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Fifield
- Fifield is located in Price County
- Kennedy
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Kennedy
- Kennedy is located in Price County
- Lugerville
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Lugerville
- Lugerville is located in Price County
- Tannery Town
(21 miles [33.8 km] to the north)- Note: The GPS coordinates that we are using for Tannery Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tannery Town
- Tannery Town is located in Ashland County
- White City
(22 miles [35.4 km] to the north)- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Ashland County
- Mellen
(22 miles [35.4 km] to the north) - Phillips
(23 miles [37 km] to the south)- Jump to our Gazetteer entry for Phillips
- Phillips is located in Price County
- Population from the 2020 Census: 1,320 people
- Manitowish
(24 miles [38.6 km] to the east)- Jump to our Gazetteer entry for Manitowish
- Manitowish is located in Iron County
- High Bridge
(27 miles [43.5 km] to the northwest)- Jump to our Gazetteer entry for High Bridge
- High Bridge is located in Ashland County
- Winter
(28 miles [45.1 km] to the southwest)- Jump to our Gazetteer entry for Winter
- Winter is located in Sawyer County
- Population from the 2020 Census: 294 people
- Lac du Flambeau
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Lac du Flambeau
- Lac du Flambeau is located in Vilas County
- Manitowish Waters
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Manitowish Waters have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manitowish Waters
- Manitowish Waters is located in Vilas County
Off-the-Road Links ...
The official website for Ashland County: www.co.ashland.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Union Cemetery. The point we use is located at these GPS coordinates - Latitude: 46.0233, Longitude: -90.4907 In this case, the coordinates for the Union Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |