Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. John - St. James Lutheran Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. John - St. James Lutheran Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the St. John - St. James Lutheran Cemetery (FG ID #2206227). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the St. John - St. James Lutheran Cemetery. We've listed the following communities based on their distance, with the closest first.
- Reedsville
(Less than 2 miles to the northeast)
- Grimms
(3 miles [4.8 km] to the east)
- Collins
(4 miles [6.4 km] to the south)
- Cato
(5 miles [8 km] to the east)
- Taus
(5 miles [8 km] to the northeast)
- Brillion
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Brillion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brillion
- Brillion is located in Calumet County
- Population from the 2020 Census: 3,079 people
- Potter
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Potter have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Potter
- Potter is located in Calumet County
- Population from the 2020 Census: 236 people
- Clarks Mills
(6 miles [9.7 km] to the southeast)
- Menchalville
(6 miles [9.7 km] to the northeast)
- Valders
(7 miles [11.3 km] to the southeast)
- Whitelaw
(7 miles [11.3 km] to the east)
- Wayside
(7 miles [11.3 km] to the north)
- Madsen
(8 miles [12.9 km] to the southeast)
- Reifs Mills
(8 miles [12.9 km] to the east)
- Kellnersville
(9 miles [14.5 km] to the northeast)
- Forest Junction
(9 miles [14.5 km] to the northwest)
- Hilbert
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Hilbert have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilbert
- Hilbert is located in Calumet County
- Population from the 2020 Census: 1,081 people
- Saint Nazianz
(10 miles [16.1 km] to the south)
- Rube
(10 miles [16.1 km] to the southeast)
- Branch
(10 miles [16.1 km] to the east)
- Askeaton
(10 miles [16.1 km] to the northwest)
- Morrison
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Morrison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrison
- Morrison is located in Brown County
- Hayton
(11 miles [17.7 km] to the southwest)
- Steinthal
(11 miles [17.7 km] to the south)
- Alverno
(11 miles [17.7 km] to the east)
- Maribel
(11 miles [17.7 km] to the northeast)
- Rosecrans
(11 miles [17.7 km] to the northeast)
- Hickory Grove
(11 miles [17.7 km] to the northeast)
- Lark
(11 miles [17.7 km] to the north)
- Saint John
(11 miles [17.7 km] to the west)
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. John - St. James Lutheran Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.1503, Longitude: -87.9634 |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |