Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Francis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Francis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Francis Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Port Arthur
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Port Arthur
- Port Arthur is located in Rusk County
- Cornell
(9 miles [14.5 km] to the south) - Conrath
(9 miles [14.5 km] to the northeast) - Bruce
(11 miles [17.7 km] to the north) - Apollonia
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Apollonia
- Apollonia is located in Rusk County
- Sheldon
(11 miles [17.7 km] to the east) - Ladysmith
(12 miles [19.3 km] to the northeast) - Weyerhaeuser
(13 miles [20.9 km] to the northwest)- Note: The GPS coordinates that we are using for Weyerhaeuser have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weyerhaeuser
- Weyerhaeuser is located in Rusk County
- Population from the 2020 Census: 210 people
- Tony
(15 miles [24.1 km] to the northeast) - Drywood
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Drywood
- Drywood is located in Chippewa County
- New Auburn
(18 miles [29 km] to the west)- Jump to our Gazetteer entry for New Auburn
- New Auburn is located in Chippewa County
- Population from the 2020 Census: 576 people
- Strickland
(18 miles [29 km] to the northwest)- Jump to our Gazetteer entry for Strickland
- Strickland is located in Rusk County
- Bloomer
(19 miles [30.6 km] to the southwest)- Jump to our Gazetteer entry for Bloomer
- Bloomer is located in Chippewa County
- Population from the 2020 Census: 3,508 people
- Eagleton
(19 miles [30.6 km] to the southwest)- Jump to our Gazetteer entry for Eagleton
- Eagleton is located in Chippewa County
- Jump River
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Jump River
- Jump River is located in Taylor County
- Glen Flora
(19 miles [30.6 km] to the northeast)- Note: The GPS coordinates that we are using for Glen Flora have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Flora
- Glen Flora is located in Rusk County
- Population from the 2020 Census: 85 people
- Gilman
(21 miles [33.8 km] to the southeast)- Jump to our Gazetteer entry for Gilman
- Gilman is located in Taylor County
- Population from the 2020 Census: 390 people
- Polley
(22 miles [35.4 km] to the southeast)- Jump to our Gazetteer entry for Polley
- Polley is located in Taylor County
- Chetek
(22 miles [35.4 km] to the west) - Ingram
(23 miles [37 km] to the northeast) - Cadott
(24 miles [38.6 km] to the south) - Hughey ‑ Historic
(24 miles [38.6 km] to the east) - Boyd
(25 miles [40.2 km] to the south) - Eadsville
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for Eadsville
- Eadsville is located in Clark County
- Exeland
(25 miles [40.2 km] to the north)
Off-the-Road Links ...
The official website for Rusk County: www.ruskcounty.org/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Francis Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.3019, Longitude: -91.1982 In this case, the coordinates for the St. Francis Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |