Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hillcrest Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hillcrest Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hillcrest Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Rib Lake
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Rib Lake
- Rib Lake is located in Taylor County
- Population from the 2020 Census: 861 people
- Prentice
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Prentice
- Prentice is located in Price County
- Population from the 2020 Census: 597 people
- Jersey City
(16 miles [25.7 km] to the east)- Note: The GPS coordinates that we are using for Jersey City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jersey City
- Jersey City is located in Lincoln County
- Tomahawk
(17 miles [27.4 km] to the east)- Jump to our Gazetteer entry for Tomahawk
- Tomahawk is located in Lincoln County
- Population from the 2020 Census: 3,133 people
- Phillips
(22 miles [35.4 km] to the northwest) - Catawba
(22 miles [35.4 km] to the west)- Jump to our Gazetteer entry for Catawba
- Catawba is located in Price County
- Population from the 2020 Census: 99 people
- Kennan
(24 miles [38.6 km] to the west) - Medford
(25 miles [40.2 km] to the southwest)- Jump to our Gazetteer entry for Medford
- Medford is located in Taylor County
- Population from the 2020 Census: 4,267 people
- Harshaw
(25 miles [40.2 km] to the northeast)- Jump to our Gazetteer entry for Harshaw
- Harshaw is located in Oneida County
- Hamburg
(26 miles [41.8 km] to the south)- Jump to our Gazetteer entry for Hamburg
- Hamburg is located in Marathon County
- Merrill
(26 miles [41.8 km] to the southeast) - Stetsonville
(28 miles [45.1 km] to the south)- Note: The GPS coordinates that we are using for Stetsonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stetsonville
- Stetsonville is located in Taylor County
- Population from the 2020 Census: 518 people
- Emmerich
(28 miles [45.1 km] to the southeast)- Jump to our Gazetteer entry for Emmerich
- Emmerich is located in Marathon County
- Harrison
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Harrison
- Harrison is located in Lincoln County
- Athens
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Athens
- Athens is located in Marathon County
- Population from the 2020 Census: 1,079 people
- Naugart
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for Naugart
- Naugart is located in Marathon County
- Hazelhurst
(29 miles [46.7 km] to the northeast)- Jump to our Gazetteer entry for Hazelhurst
- Hazelhurst is located in Oneida County
- Lugerville
(29 miles [46.7 km] to the northwest)- Jump to our Gazetteer entry for Lugerville
- Lugerville is located in Price County
Off-the-Road Links ...
The official website for Price County: www.co.price.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hillcrest Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.4550, Longitude: -90.0868 In this case, the coordinates for the Hillcrest Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |