RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Wisconsin >> Jefferson County >> Blackhawk Island >> Nearby Communities - 1890sIndex...

Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Blackhawk Island in the Atlas, the following communities of the 1890's would have been found near the current location of Blackhawk Island. The following communities are listed based on their distance, with the one closest to Blackhawk Island listed first.

  • Koshkonong
    (3 miles [4.8 km] to the south)
    • Koshkonong is located in Jefferson County
    • Jump to our Gazetteer entry for Koshkonong
  • Fort Atkinson
    (3 miles [4.8 km] to the northeast)
    • Fort Atkinson is located in Jefferson County
    • Jump to our Gazetteer entry for Fort Atkinson
    • Population from the 2020 Census: 12,372 people
  • Cold Spring
    (5 miles [8 km] to the east)
    • Cold Spring is located in Jefferson County
    • Jump to our Gazetteer entry for Cold Spring
  • Milton Junction
    (8 miles [12.9 km] to the southwest)
    • Milton Junction is located in Rock County
    • Jump to our Gazetteer entry for Milton Junction
  • Milton
    (8 miles [12.9 km] to the south)
    • Milton is located in Rock County
    • Jump to our Gazetteer entry for Milton
    • Population from the 2020 Census: 5,643 people
  • Lima Center
    (8 miles [12.9 km] to the southeast)
    • Lima Center is located in Rock County
    • Jump to our Gazetteer entry for Lima Center
  • Jefferson
    (8 miles [12.9 km] to the northeast)
    • Jefferson is located in Jefferson County
    • Jump to our Gazetteer entry for Jefferson
    • Population from the 2020 Census: 8,037 people
  • Rockdale
    (8 miles [12.9 km] to the northwest)
    • Rockdale is located in Dane County
    • Jump to our Gazetteer entry for Rockdale
    • Population from the 2020 Census: 216 people
  • Whitewater
    (9 miles [14.5 km] to the southeast)
    • Whitewater is located in Walworth County
    • Jump to our Gazetteer entry for Whitewater
    • Population from the 2020 Census: 14,993 people
  • Cambridge
    (9 miles [14.5 km] to the northwest)
    • Cambridge is located in Dane County
    • Jump to our Gazetteer entry for Cambridge
    • Population from the 2020 Census: 1,538 people
  • Albion
    (9 miles [14.5 km] to the west)
    • Albion is located in Dane County
    • Jump to our Gazetteer entry for Albion
  • Edgerton
    (10 miles [16.1 km] to the southwest)
    • Edgerton is located in Rock County
    • Jump to our Gazetteer entry for Edgerton
    • Population from the 2020 Census: 5,595 people
  • Hebron
    (10 miles [16.1 km] to the east)
    • Hebron is located in Jefferson County
    • Jump to our Gazetteer entry for Hebron
  • Jefferson Junction
    (10 miles [16.1 km] to the northeast)
    • Jefferson Junction is located in Jefferson County
    • Jump to our Gazetteer entry for Jefferson Junction
  • London
    (11 miles [17.7 km] to the northwest)
    • London is located in Dane County
    • Jump to our Gazetteer entry for London
  • Indianford
    (12 miles [19.3 km] to the southwest)
    • Indianford is located in Rock County
    • Jump to our Gazetteer entry for Indianford
  • Helenville
    (12 miles [19.3 km] to the northeast)
    • Helenville is located in Jefferson County
    • Jump to our Gazetteer entry for Helenville
  • Aztalan
    (12 miles [19.3 km] to the north)
    • Aztalan is located in Jefferson County
    • Jump to our Gazetteer entry for Aztalan
  • Lake Mills
    (12 miles [19.3 km] to the north)
    • Lake Mills is located in Jefferson County
    • Jump to our Gazetteer entry for Lake Mills
    • Population from the 2020 Census: 6,014 people
  • Utica
    (12 miles [19.3 km] to the west)
    • Utica is located in Dane County
    • Jump to our Gazetteer entry for Utica
  • Fulton
    (13 miles [20.9 km] to the southwest)
    • Fulton is located in Rock County
    • Jump to our Gazetteer entry for Fulton
  • Johnson Creek
    (13 miles [20.9 km] to the northeast)
    • Johnson Creek is located in Jefferson County
    • Jump to our Gazetteer entry for Johnson Creek
    • Population from the 2020 Census: 3,065 people
  • Hanerville
    (13 miles [20.9 km] to the west)
    • Hanerville is located in Dane County
    • Jump to our Gazetteer entry for Hanerville
  • Stebbinsville
    (14 miles [22.5 km] to the west)
    • Stebbinsville is located in Rock County
    • Jump to our Gazetteer entry for Stebbinsville
  • Johnstown Center
    (14 miles [22.5 km] to the south)
    • Johnstown Center is located in Rock County
    • Jump to our Gazetteer entry for Johnstown Center
  • Johnstown
    (14 miles [22.5 km] to the south)
    • Johnstown is located in Rock County
    • Jump to our Gazetteer entry for Johnstown
  • Rome
    (14 miles [22.5 km] to the northeast)
    • Rome is located in Jefferson County
    • Jump to our Gazetteer entry for Rome
  • Milford
    (14 miles [22.5 km] to the north)
    • Milford is located in Jefferson County
    • Jump to our Gazetteer entry for Milford
  • Deerfield
    (14 miles [22.5 km] to the northwest)
    • Deerfield is located in Dane County
    • Jump to our Gazetteer entry for Deerfield
    • Population from the 2020 Census: 2,540 people

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Blackhawk Island, please let us know so that we can improve our accuracy.