A Gazetteer for the United States and Canada
Welcome to Irondale ...
So far, we have found very little information about Irondale. The little that we've found leads us believe that the community is historic.<1>
We've added Irondale to our Gazetteer with the hope that we can develop more information. If you can help us with Irondale, please Contact Us.
Irondale would have been located within present day Jefferson County.
The location of Irondale has been provided by the Geographic Names Information System (ie- the GNIS).<2>
While the community is gone, the present day location for Irondale is 90 feet [27 m] above sea level.<3>.
Time Zone: The area where Irondale was located is in the Pacific Time Zone (PST/PDT) and observes daylight saving time
If Irondale still existed, it would have been in the (360) area code.
Communities near Irondale ...
A sample of nearby communities can be found below.
Keep in mind that when we give a distance, it's a 'straight-line' distance starting from Irondale and not the distance if you drove.<4>.
To learn more about neighboring communities and counties, please visit the Nearby Page for Irondale.
Communities Also Named Irondale ...
Using our Gazetteer, we have found that there are 14 communities that are also named Irondale - they are located in Alabama, Colorado (2), Georgia, Illinois, Indiana, Missouri, New York (2), Ohio (2), Ontario, Pennsylvania and Virginia.
For more information, see our Tidbits & Trivia Page for Irondale.
See Our Genealogy Helper Page ...
We have a couple of sections for those tracing their genealogy.
These sections can be found on our Genealogy Helper Page for Irondale:
Other Roadside Stops ...
Off-the-Road Links ...
The official website for Jefferson County: www.co.jefferson.wa.us/
The official website for State of Washington: https://access.wa.gov/
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 17 Jan 2019