Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Grandview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Grandview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Grandview Cemetery. We've listed the following communities based on their distance, with the closest first.
- Marcus
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Marcus
- Marcus is located in Stevens County
- Population from the 2020 Census: 172 people
- Evans
(3 miles [4.8 km] to the north)
- Blue Town ‑ Historic
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Blue Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue Town
- Blue Town is located in Stevens County
- Kettle Falls
(4 miles [6.4 km] to the south)
- Barstow
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Barstow
- Barstow is located in Ferry County
- Pinkney City
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Pinkney City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinkney City
- Pinkney City is located in Stevens County
- Colville
(10 miles [16.1 km] to the southeast)
- Marble
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Marble
- Marble is located in Stevens County
- Orient
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Orient
- Orient is located in Ferry County
- Rice
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Rice
- Rice is located in Stevens County
- Spirit
(20 miles [32.2 km] to the northeast)
- Jump to our Gazetteer entry for Spirit
- Spirit is located in Stevens County
- Northport
(20 miles [32.2 km] to the northeast)
- Daisy
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Daisy
- Daisy is located in Stevens County
- Addy
(23 miles [37 km] to the southeast)
- Laurier
(24 miles [38.6 km] to the north)
- Gifford
(25 miles [40.2 km] to the south)
- Cascade
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Cascade
- Paterson
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Paterson
- Inchelium
(26 miles [41.8 km] to the south)
- Christina Lake
(26 miles [41.8 km] to the north)
- Silica
(26 miles [41.8 km] to the north)
- Jump to our Gazetteer entry for Silica
- Fife
(27 miles [43.5 km] to the north)
- Jump to our Gazetteer entry for Fife
- Malo
(27 miles [43.5 km] to the west)
- Ione
(28 miles [45.1 km] to the east)
- Jump to our Gazetteer entry for Ione
- Ione is located in Pend Oreille County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Ione <2>
- Curlew
(29 miles [46.7 km] to the northwest)
Off-the-Road Links ...
The official website for Stevens County: www.co.stevens.wa.us/
The official website for State of Washington: https://wa.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Grandview Cemetery. The point we use is located at these GPS coordinates - Latitude: 48.6691, Longitude: -118.0397 In this case, the coordinates for the Grandview Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |