RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Vermont >> Rutland County >> Russellville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Vermont

The Commemorative Quarter for Vermont





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Russellville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Russellville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Russellville is located in Rutland County.

To see how the shape of Vermont's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Rutland County: Washington (NY), Addison, Bennington & Windsor.

Below are the counties that are near Russellville. For each of these counties, we show a sample of those communities that are closest to Russellville:

  • Rutland County     (The home county of Russellville)
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Bowlsville
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for Bowlsville
      • Bowlsville is located in Rutland County
    • Mount Holly
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Mount Holly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Holly
      • Mount Holly is located in Rutland County
      • Population from the 2020 Census: 1,241 people
    • Mount Holly
      (4 miles [6.4 km] to the north)
    • Mount Tabor
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Mount Tabor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Tabor
      • Mount Tabor is located in Rutland County
      • Population from the 2020 Census: 257 people
    • Healdville
      (5 miles [8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Healdville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Healdville
      • Healdville is located in Rutland County
    • Wallingford
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallingford
      • Wallingford is located in Rutland County
      • Population from the 2020 Census: 1,938 people
    • South Wallingford
      (7 miles [11.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for South Wallingford. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for South Wallingford
      • South Wallingford is located in Rutland County
    • Wallingford
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallingford
      • Wallingford is located in Rutland County
      • Jump to TripAdvisor's Tourism page for Wallingford <2>
    • Shrewsbury
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Shrewsbury have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shrewsbury
      • Shrewsbury is located in Rutland County
      • Population from the 2020 Census: 979 people
    • Danby
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Danby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Danby
      • Danby is located in Rutland County
      • Population from the 2020 Census: 1,308 people
    • Tinmouth
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Tinmouth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tinmouth
      • Tinmouth is located in Rutland County
      • Population from the 2020 Census: 588 people
    • Clarendon
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clarendon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarendon
      • Clarendon is located in Rutland County
      • Population from the 2020 Census: 2,396 people
  • Bennington County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Landgrove
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Landgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Landgrove
      • Landgrove is located in Bennington County
      • Population from the 2020 Census: 156 people
    • Peru
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Peru have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Peru
      • Peru is located in Bennington County
      • Population from the 2020 Census: 355 people
    • Landgrove Town Center
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Landgrove Town Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Landgrove Town Center
      • Landgrove Town Center is located in Bennington County
    • Bromley Village
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bromley Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bromley Village
      • Bromley Village is located in Bennington County
    • Dorset
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dorset have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dorset
      • Dorset is located in Bennington County
      • Population from the 2020 Census: 1,937 people
    • Winhall
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Winhall have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winhall
      • Winhall is located in Bennington County
      • Population from the 2020 Census: 726 people
    • Dorset
      (15 miles [24.1 km] to the southwest)
    • Barnumville
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Barnumville
      • Barnumville is located in Bennington County
    • Manchester Center
      (17 miles [27.4 km] to the southwest)
      • Jump to our Gazetteer entry for Manchester Center
      • Manchester Center is located in Bennington County
    • Manchester Depot
      (17 miles [27.4 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Manchester Depot. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Manchester Depot
      • Manchester Depot is located in Bennington County
    • Manchester
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manchester
      • Manchester is located in Bennington County
      • Population from the 2020 Census: 4,214 people
    • Manchester
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manchester
      • Manchester is located in Bennington County
      • Population from the 2020 Census: 708 people
      • Jump to TripAdvisor's Tourism page for Manchester <2>
  • Windham County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Londonderry
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Londonderry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Londonderry
      • Londonderry is located in Windham County
      • Population from the 2020 Census: 1,639 people
    • Windham
      (15 miles [24.1 km] to the south)
    • Windham
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Windham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Windham
      • Windham is located in Windham County
      • Population from the 2020 Census: 396 people
    • Grafton
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Grafton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grafton
      • Grafton is located in Windham County
      • Population from the 2020 Census: 674 people
    • South Windham
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for South Windham
      • South Windham is located in Windham County
    • Grafton
      (18 miles [29 km] to the southeast)
    • Jamaica
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Jamaica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jamaica
      • Jamaica is located in Windham County
      • Population from the 2020 Census: 1,025 people
    • Jamaica
      (19 miles [30.6 km] to the south)
    • Brockways Mills
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for Brockways Mills
      • Brockways Mills is located in Windham County
    • Stratton
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stratton
      • Stratton is located in Windham County
      • Population from the 2020 Census: 197 people
    • West Townshend
      (21 miles [33.8 km] to the south)
    • Cambridgeport
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Cambridgeport
      • Cambridgeport is located in Windham County
  • Windsor County
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Weston
      (4 miles [6.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weston
      • Weston is located in Windsor County
      • Population from the 2020 Census: 542 people
    • Ludlow
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Ludlow have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ludlow
      • Ludlow is located in Windsor County
      • Population from the 2020 Census: 1,856 people
    • Grahamville
      (7 miles [11.3 km] to the east)
      • Jump to our Gazetteer entry for Grahamville
      • Grahamville is located in Windsor County
    • Ludlow
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Ludlow have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ludlow
      • Ludlow is located in Windsor County
      • Population from the 2020 Census: 764 people
      • Jump to TripAdvisor's Tourism page for Ludlow <2>
    • Tyson
      (8 miles [12.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Tyson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tyson
      • Tyson is located in Windsor County
    • Andover
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Andover
      • Andover is located in Windsor County
      • Population from the 2020 Census: 472 people
    • Proctorsville
      (10 miles [16.1 km] to the east)
    • Andover
      (10 miles [16.1 km] to the southeast)
    • Simonsville
      (10 miles [16.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Simonsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Simonsville
      • Simonsville is located in Windsor County
    • Cavendish
      (11 miles [17.7 km] to the east)
    • Plymouth
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Plymouth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plymouth
      • Plymouth is located in Windsor County
      • Population from the 2020 Census: 599 people
    • Cavendish
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Cavendish have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cavendish
      • Cavendish is located in Windsor County
      • Population from the 2020 Census: 1,415 people
  • Cheshire County (NH)
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Cold River
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Cold River. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Cold River
      • Cold River is located in Cheshire County (NH)
    • Alstead
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Alstead
      • Alstead is located in Cheshire County (NH)
      • Population from the 2020 Census: 1,951 people
      • Jump to TripAdvisor's Tourism page for Alstead <2>
    • Drewsville
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Drewsville
      • Drewsville is located in Cheshire County (NH)
    • Walpole
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Walpole
      • Walpole is located in Cheshire County (NH)
      • Population from the 2020 Census: 4,032 people
      • Jump to TripAdvisor's Tourism page for Walpole <2>
  • Sullivan County (NH)
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Balloch
      (22 miles [35.4 km] to the east)
      • Jump to our Gazetteer entry for Balloch
      • Balloch is located in Sullivan County (NH)
    • Charlestown
      (23 miles [37 km] to the southeast)
    • Cornish
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Cornish
      • Cornish is located in Sullivan County (NH)
      • Population from the 2020 Census: 1,616 people
      • Jump to TripAdvisor's Tourism page for Cornish <2>
    • Claremont
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Claremont
      • Claremont is located in Sullivan County (NH)
      • Population from the 2020 Census: 12,944 people
      • Jump to TripAdvisor's Tourism page for Claremont <2>
    • Cornish City
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Cornish City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cornish City
      • Cornish City is located in Sullivan County (NH)
    • Squag City
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Squag City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Squag City
      • Squag City is located in Sullivan County (NH)
    • Quaker City
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Quaker City
      • Quaker City is located in Sullivan County (NH)
    • Plainfield
      (26 miles [41.8 km] to the northeast)
    • South Cornish
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for South Cornish. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for South Cornish
      • South Cornish is located in Sullivan County (NH)
    • Mill Village
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Mill Village
      • Mill Village is located in Sullivan County (NH)
    • Langdon
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Langdon
      • Langdon is located in Sullivan County (NH)
      • Population from the 2020 Census: 688 people
    • Acworth
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Acworth
      • Acworth is located in Sullivan County (NH)
      • Population from the 2020 Census: 897 people
  • Washington County (NY)
    • The following are listed by their distance from Russellville, with the one closest to Russellville listed first.
    • Granville
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Granville
      • Granville is located in Washington County (NY)
      • Population from the 2020 Census: 2,416 people
      • Jump to TripAdvisor's Tourism page for Granville <2>
    • Hampton
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Hampton
      • Hampton is located in Washington County (NY)
    • Middle Granville
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Middle Granville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Middle Granville
      • Middle Granville is located in Washington County (NY)
      • Jump to TripAdvisor's Tourism page for Middle Granville <2>
    • Porter
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Porter
      • Porter is located in Washington County (NY)
    • North Hebron
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for North Hebron
      • North Hebron is located in Washington County (NY)
    • Truthville
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Truthville
      • Truthville is located in Washington County (NY)
    • North Granville
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for North Granville
      • North Granville is located in Washington County (NY)
    • East Hartford
      (27 miles [43.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for East Hartford. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for East Hartford
      • East Hartford is located in Washington County (NY)
    • Hartford
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Hartford
      • Hartford is located in Washington County (NY)
    • Salem
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Washington County (NY)
      • Estimated population in 2016: 912 people
      • Jump to TripAdvisor's Tourism page for Salem <2>
    • Belcher
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Belcher
      • Belcher is located in Washington County (NY)
    • South Hartford
      (28 miles [45.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for South Hartford. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for South Hartford
      • South Hartford is located in Washington County (NY)

For an expanded list of the communities that are closest to Russellville, see our County-by-County Page for Russellville.

Cemeteries Near Russellville ...

Below are cemeteries that are in the vicinity of Russellville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Russellville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Russellville, with the one closest to Russellville listed first.

  • Tarbellville Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Tarbellville Cemetery
    • Note: The GPS coordinates that we are using for the Tarbellville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Carlton Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Carlton Cemetery
    • Note: The GPS coordinates that we are using for the Carlton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • New Mechanicsville Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the New Mechanicsville Cemetery
    • Note: The GPS coordinates that we are using for the New Mechanicsville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Old Mechanicsville Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Old Mechanicsville Cemetery
    • Note: The GPS coordinates that we are using for the Old Mechanicsville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Maple Grove Cemetery
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for the Maple Grove Cemetery
    • Note: The GPS coordinates that we are using for the Maple Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Packer Cemetery
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for the Packer Cemetery
    • Note: The GPS coordinates that we are using for the Packer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Mt. Holly Cemetery
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for the Mt. Holly Cemetery
    • Note: The GPS coordinates that we are using for the Mt. Holly Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sugar Hill Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Sugar Hill Cemetery
    • Note: The GPS coordinates that we are using for the Sugar Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Pelsue - Jarvary Cemetery
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for the Pelsue - Jarvary Cemetery
    • Note: The GPS coordinates that we are using for the Pelsue - Jarvary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Forefathers Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Forefathers Cemetery
    • Note: The GPS coordinates that we are using for the Forefathers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Maple Grove Cemetery
    (6 miles [9.7 km] to the southeast)
    • Jump to our Gazetteer entry for the Maple Grove Cemetery
    • Note: The GPS coordinates that we are using for the Maple Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hortonville Cemetery
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for the Hortonville Cemetery
    • Note: The GPS coordinates that we are using for the Hortonville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (483 more) ...
    • Mt. Tabor Cemetery
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for the Mt. Tabor Cemetery
      • Note: The GPS coordinates that we are using for the Mt. Tabor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Laurel Glen Cemetery
      (7 miles [11.3 km] to the north)
      • Jump to our Gazetteer entry for the Laurel Glen Cemetery
      • Note: The GPS coordinates that we are using for the Laurel Glen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Landgrove Cemetery
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for the Landgrove Cemetery
      • To give a relative sense of its location, the Landgrove Cemetery is located in the vicinity of Landgrove
      • The Landgrove Cemetery has also been known as:
      • Old Cemetery
      • Jump to Find-A-Grave: FG ID #2216251 <4>

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Russellville in the Atlas, the following 1895 communities would have been found near the current location of Russellville.

These communities are listed based on their distance from Russellville, with the one closest to Russellville listed first.

  • East Wallingford
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for East Wallingford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Wallingford
    • East Wallingford is located in Rutland County
    • Jump to TripAdvisor's Tourism page for East Wallingford <2>
  • Mount Holly
    (4 miles [6.4 km] to the north)
  • Healdville
    (5 miles [8 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Healdville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Healdville
    • Healdville is located in Rutland County
  • Weston
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weston
    • Weston is located in Windsor County
    • Jump to TripAdvisor's Tourism page for Weston <2>
  • Hortonville
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Hortonville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hortonville
    • Hortonville is located in Rutland County
  • Cuttingsville
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Cuttingsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cuttingsville
    • Cuttingsville is located in Rutland County
    • Jump to TripAdvisor's Tourism page for Cuttingsville <2>
  • Ludlow
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Ludlow have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ludlow
    • Ludlow is located in Windsor County
    • Population from the 2020 Census: 764 people
    • Jump to TripAdvisor's Tourism page for Ludlow <2>
  • South Wallingford
    (7 miles [11.3 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for South Wallingford. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for South Wallingford
    • South Wallingford is located in Rutland County
  • Danby
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Danby have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Danby
    • Danby is located in Rutland County
    • Jump to TripAdvisor's Tourism page for Danby <2>
  • Tyson
    (8 miles [12.9 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Tyson. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Tyson
    • Tyson is located in Windsor County
  • Shrewsbury
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Shrewsbury have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shrewsbury
    • Shrewsbury is located in Rutland County
    • Jump to TripAdvisor's Tourism page for Shrewsbury <2>
  • Wallingford
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wallingford
    • Wallingford is located in Rutland County
    • Jump to TripAdvisor's Tourism page for Wallingford <2>
  • Continue List   (14 more) ...
    • Danby Four Corners
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Danby Four Corners have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Danby Four Corners
      • Danby Four Corners is located in Rutland County
    • North Dorset
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for North Dorset have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Dorset
      • North Dorset is located in Bennington County
    • Peru
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Peru have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Peru
      • Peru is located in Bennington County
      • Jump to TripAdvisor's Tourism page for Peru <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Russellville. See our List of 1890's Communities around Russellville.

Newspapers Published in Russellville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 20 newspapers that have been published in the area around Russellville.

Although we're unaware of any newspapers that were published in the immediate area of Russellville, there are papers which were published within 17 miles [27.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Russellville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Russellville:

Unfortunately, we don't know of a website for Russellville. If you can help, please contact us through our Feedback Page.

The official website for State of Vermont: https://www.vermont.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Russellville, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Russellville) to Point B.Our distance measurements begin at a specific point in Russellville. The point we use is located at these GPS coordinates - Latitude: 43.3820, Longitude: -72.8415       In this case, the coordinates for Russellville have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025