Census Data for Danby

As far as we can tell, Danby has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Danby, you might be interested in some nearby communities where we do:

• Danby
  (3 miles [4.8 km] to the west)
  • Danby is located in Rutland County
  • Jump to our Gazetteer entry for Danby
• Mount Tabor
  (3 miles [4.8 km] to the east)
  • Mount Tabor is located in Rutland County
  • Jump to our Gazetteer entry for Mount Tabor
• Dorset
  (6 miles [9.7 km] to the southwest)
  • Dorset is located in Bennington County
  • Jump to our Gazetteer entry for Dorset
• Peru
  (7 miles [11.3 km] to the southeast)
  • Peru is located in Bennington County
  • Jump to our Gazetteer entry for Peru
• Tinmouth
  (7 miles [11.3 km] to the northwest)
  • Tinmouth is located in Rutland County
  • Jump to our Gazetteer entry for Tinmouth
• Wallingford
  (7 miles [11.3 km] to the northeast)
  • Wallingford is located in Rutland County
  • Jump to our Gazetteer entry for Wallingford
• Landgrove
  (9 miles [14.5 km] to the southeast)
  • Landgrove is located in Bennington County
  • Jump to our Gazetteer entry for Landgrove
• Pawlet
  (9 miles [14.5 km] to the west)
  • Pawlet is located in Rutland County
  • Jump to our Gazetteer entry for Pawlet
• Weston
  (9 miles [14.5 km] to the east)
  • Weston is located in Windsor County
  • Jump to our Gazetteer entry for Weston
• Middletown Springs
  (11 miles [17.7 km] to the northwest)
  • Middletown Springs is located in Rutland County
  • Jump to our Gazetteer entry for Middletown Springs
• Mount Holly
  (11 miles [17.7 km] to the northeast)
  • Mount Holly is located in Rutland County
  • Jump to our Gazetteer entry for Mount Holly
• Rupert
  (11 miles [17.7 km] to the southwest)
  • Rupert is located in Bennington County
  • Jump to our Gazetteer entry for Rupert
• Continue List   (372 more) ...
  • Wells
    (11 miles [17.7 km] to the northwest)
    • Wells is located in Rutland County
    • Jump to our Gazetteer entry for Wells
  • Clarendon
    (12 miles [19.3 km] to the north)
    • Clarendon is located in Rutland County
    • Jump to our Gazetteer entry for Clarendon
  • Winhall
    (12 miles [19.3 km] to the south)
    • Winhall is located in Bennington County
    • Jump to our Gazetteer entry for Winhall

Rutland County ...

Danby is located in Rutland County<1>.

For more information, please visit our Census Page for Rutland County.

Miscellaneous Information for Danby ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Rutland County or the community of Danby:

• The GNIS Codes ...
  • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Danby:
  • GNIS ID for Danby: 1460774
  • GNIS ID for Rutland County: 1461767
  • GNIS ID for State of Vermont: 1779802

• The FIPS Codes ...
  • An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
  • State Code: 50 (Vermont)
  • County Code: 021 (Rutland County)
  • Place Code: 16750 (Danby)
  • State & County Code: 50/021 (Vermont / Rutland County)
  • State & Place Code: 50/16750 (Vermont / Danby)

• Misc. Census Codes ...
  • Danby is located in Census Region #1 (the Northeast Region) and Division #1 (the New England Division).

• The US Postal Service ZIP Code ...
  • While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a community like Danby, it does identify addresses that are in (or near) Danby. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
  • The ZIP code for Danby:05739<2>

• Census ZCTA Codes ...
  • The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
  • ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.

For more information about the various Federal identification codes, please visit our Misc Page for Danby.