|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Read - Old Four Corners Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Read - Old Four Corners Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Read - Old Four Corners Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Danby
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Danby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Danby
- Danby is located in Rutland County
- Population from the 2020 Census: 1,308 people
- Dorset
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Dorset have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dorset
- Dorset is located in Bennington County
- Population from the 2020 Census: 1,937 people
- South Wallingford
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for South Wallingford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Wallingford
- South Wallingford is located in Rutland County
- Dorset
(6 miles [9.7 km] to the south)
- Mount Tabor
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Mount Tabor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Tabor
- Mount Tabor is located in Rutland County
- Population from the 2020 Census: 257 people
- Tinmouth
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Tinmouth have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tinmouth
- Tinmouth is located in Rutland County
- Population from the 2020 Census: 588 people
- Pawlet
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Pawlet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pawlet
- Pawlet is located in Rutland County
- Population from the 2020 Census: 1,359 people
- Rupert
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Rupert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rupert
- Rupert is located in Bennington County
- Population from the 2020 Census: 682 people
- Peru
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Peru have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peru
- Peru is located in Bennington County
- Population from the 2020 Census: 355 people
- Wallingford
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallingford
- Wallingford is located in Rutland County
- Population from the 2020 Census: 1,938 people
- Wallingford
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallingford
- Wallingford is located in Rutland County
- Jump to TripAdvisor's Tourism page for Wallingford <3>
- Wells
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wells
- Wells is located in Rutland County
- Population from the 2020 Census: 1,151 people
- Wells
(9 miles [14.5 km] to the northwest)
- Rupert
(10 miles [16.1 km] to the southwest)
- Barnumville
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Barnumville
- Barnumville is located in Bennington County
- Middletown Springs
(10 miles [16.1 km] to the north)
- Bromley Village
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bromley Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bromley Village
- Bromley Village is located in Bennington County
- Middletown Springs
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Middletown Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown Springs
- Middletown Springs is located in Rutland County
- Population from the 2020 Census: 748 people
- Porter
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Porter
- Porter is located in Washington County (NY)
- Manchester Center
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Manchester Center
- Manchester Center is located in Bennington County
- Manchester Depot
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Manchester Depot have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester Depot
- Manchester Depot is located in Bennington County
- Landgrove Town Center
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Landgrove Town Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Landgrove Town Center
- Landgrove Town Center is located in Bennington County
- Landgrove
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Landgrove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Landgrove
- Landgrove is located in Bennington County
- Population from the 2020 Census: 156 people
- Granville
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Granville
- Granville is located in Washington County (NY)
- Population from the 2020 Census: 2,416 people
- Jump to TripAdvisor's Tourism page for Granville <3>
- West Rupert
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for West Rupert
- West Rupert is located in Bennington County
- Manchester
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Bennington County
- Population from the 2020 Census: 4,214 people
- Manchester
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Bennington County
- Population from the 2020 Census: 708 people
- Jump to TripAdvisor's Tourism page for Manchester <3>
- Weston
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weston
- Weston is located in Windsor County
- Population from the 2020 Census: 542 people
- Bowlsville
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Bowlsville
- Bowlsville is located in Rutland County
Off-the-Road Links ...
The official website for State of Vermont: https://www.vermont.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Read - Old Four Corners Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.3431, Longitude: -73.0484 In this case, the coordinates for the Read - Old Four Corners Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|