|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Quaker - Staples Farm Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Quaker - Staples Farm Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Quaker - Staples Farm Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Danby Four Corners
(Less than 2 miles to the northwest)
- Danby Four Corners is located in Rutland County
- Jump to our Gazetteer entry for Danby Four Corners
- Danby
(Less than 2 miles to the northwest)
- Danby is located in Rutland County
- Jump to our Gazetteer entry for Danby
- Population from the 2020 Census: 1,308 people
- South Wallingford
(4 miles [6.4 km] to the north)
- South Wallingford is located in Rutland County
- Jump to our Gazetteer entry for South Wallingford
- Dorset
(5 miles [8 km] to the south)
- Dorset is located in Bennington County
- Jump to our Gazetteer entry for Dorset
- Population from the 2020 Census: 1,937 people
- Mount Tabor
(5 miles [8 km] to the east)
- Mount Tabor is located in Rutland County
- Jump to our Gazetteer entry for Mount Tabor
- Population from the 2020 Census: 257 people
- Tinmouth
(7 miles [11.3 km] to the north)
- Tinmouth is located in Rutland County
- Jump to our Gazetteer entry for Tinmouth
- Population from the 2020 Census: 588 people
- Dorset
(7 miles [11.3 km] to the southwest)
- Pawlet
(7 miles [11.3 km] to the west)
- Peru
(8 miles [12.9 km] to the southeast)
- Peru is located in Bennington County
- Jump to our Gazetteer entry for Peru
- Population from the 2020 Census: 355 people
- Wallingford
(8 miles [12.9 km] to the northeast)
- Wallingford is located in Rutland County
- Jump to our Gazetteer entry for Wallingford
- Population from the 2020 Census: 1,938 people
- Wallingford
(8 miles [12.9 km] to the north)
- Pawlet
(8 miles [12.9 km] to the west)
- Pawlet is located in Rutland County
- Jump to our Gazetteer entry for Pawlet
- Population from the 2020 Census: 1,359 people
- Rupert
(10 miles [16.1 km] to the southwest)
- Rupert is located in Bennington County
- Jump to our Gazetteer entry for Rupert
- Population from the 2020 Census: 682 people
- Barnumville
(10 miles [16.1 km] to the south)
- Barnumville is located in Bennington County
- Jump to our Gazetteer entry for Barnumville
- Bromley Village
(10 miles [16.1 km] to the southeast)
- Bromley Village is located in Bennington County
- Jump to our Gazetteer entry for Bromley Village
- Landgrove
(10 miles [16.1 km] to the southeast)
- Landgrove is located in Bennington County
- Jump to our Gazetteer entry for Landgrove
- Population from the 2020 Census: 156 people
- Middletown Springs
(10 miles [16.1 km] to the northwest)
- Middletown Springs
(10 miles [16.1 km] to the northwest)
- Middletown Springs is located in Rutland County
- Jump to our Gazetteer entry for Middletown Springs
- Population from the 2020 Census: 748 people
- Wells
(10 miles [16.1 km] to the northwest)
- Wells is located in Rutland County
- Jump to our Gazetteer entry for Wells
- Population from the 2020 Census: 1,151 people
- Wells
(10 miles [16.1 km] to the northwest)
- Rupert
(11 miles [17.7 km] to the southwest)
- Manchester Center
(11 miles [17.7 km] to the south)
- Manchester Center is located in Bennington County
- Jump to our Gazetteer entry for Manchester Center
- Landgrove Town Center
(11 miles [17.7 km] to the southeast)
- Landgrove Town Center is located in Bennington County
- Jump to our Gazetteer entry for Landgrove Town Center
- Weston
(11 miles [17.7 km] to the east)
- Weston is located in Windsor County
- Jump to our Gazetteer entry for Weston
- Population from the 2020 Census: 542 people
- Bowlsville
(11 miles [17.7 km] to the northeast)
- Bowlsville is located in Rutland County
- Jump to our Gazetteer entry for Bowlsville
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Quaker - Staples Farm Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|