Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Radium in the Atlas, the following communities of the 1890's would have been found near the current location of Radium. The following communities are listed based on their distance, with the one closest to Radium listed first.
- Pleasant Shade
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Pleasant Shade have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Shade
- Pleasant Shade is located in Greensville County
- Durand
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Durand have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durand
- Durand is located in Greensville County
- Totaro
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Totaro. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Totaro
- Totaro is located in Brunswick County
- Google driving directions:
- From your current location to Totaro
- From Radium to Totaro
- Emporia
(5 miles [8 km] to the southeast)
- Ante
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ante. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ante
- Ante is located in Brunswick County
- Google driving directions:
- From your current location to Ante
- From Radium to Ante
- Brink
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Brink have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brink
- Brink is located in Greensville County
- Callaville
(7 miles [11.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Callaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Callaville
- Callaville is located in Brunswick County
- Google driving directions:
- From your current location to Callaville
- From Radium to Callaville
- James River Junction
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for James River Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for James River Junction
- James River Junction is located in Greensville County
- Edgerton
(8 miles [12.9 km] to the west)
- Skippers
(9 miles [14.5 km] to the southeast)
- Powellton
(10 miles [16.1 km] to the southwest)
- Green Plain
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Green Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Plain
- Green Plain is located in Greensville County
- Grizzard
(10 miles [16.1 km] to the east)
- Jarratt
(10 miles [16.1 km] to the northeast)
- Ezell
(12 miles [19.3 km] to the west)
- Barley
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Barley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barley
- Barley is located in Greensville County
- Claresville
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Claresville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Claresville
- Claresville is located in Greensville County
- Google driving directions:
- From your current location to Claresville
- From Radium to Claresville
- Lawrenceville
(12 miles [19.3 km] to the west)
- Adams Grove
(13 miles [20.9 km] to the east)
- Mason
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Mason have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mason
- Mason is located in Sussex County
- Henry
(13 miles [20.9 km] to the east)
- Valentines
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Valentines have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valentines
- Valentines is located in Brunswick County
- Pleasant Hill
(14 miles [22.5 km] to the south)
- Gholsonville
(15 miles [24.1 km] to the west)
- Sturgeonville
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Sturgeonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sturgeonville
- Sturgeonville is located in Brunswick County
Off-the-Road Links ...
The official website for Greensville County: www.greensvillecountyva.gov/
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Radium, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |