Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pilot View Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pilot View Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pilot View Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ararat
(3 miles [4.8 km] to the south)- Jump to our Gazetteer entry for Ararat
- Ararat is located in Patrick County
- Jump to TripAdvisor's Tourism page for Ararat <2>
- Carters Mill
(3 miles [4.8 km] to the southeast)- Jump to our Gazetteer entry for Carters Mill
- Carters Mill is located in Patrick County
- Nester
(5 miles [8 km] to the northwest) - Gladesboro
(5 miles [8 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Gladesboro. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gladesboro
- Gladesboro is located in Carroll County
- Pike City
(6 miles [9.7 km] to the north) - Mount Herman
(8 miles [12.9 km] to the south)- Jump to our Gazetteer entry for Mount Herman
- Mount Herman is located in Surry County (NC)
- Cana
(9 miles [14.5 km] to the southwest)- Note: The GPS coordinates that we are using for Cana have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cana
- Cana is located in Carroll County
- Jump to TripAdvisor's Tourism page for Cana <2>
- Flat Rock
(9 miles [14.5 km] to the south) - Albion
(9 miles [14.5 km] to the southeast) - Meadows of Dan
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Meadows of Dan
- Meadows of Dan is located in Patrick County
- Jump to TripAdvisor's Tourism page for Meadows of Dan <2>
- Fancy Gap
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Fancy Gap
- Fancy Gap is located in Carroll County
- Jump to TripAdvisor's Tourism page for Fancy Gap <2>
- Sheltontown
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Sheltontown
- Sheltontown is located in Surry County (NC)
- Toast
(11 miles [17.7 km] to the southwest) - Mount Airy
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Mount Airy
- Mount Airy is located in Surry County (NC)
- Population from the 2020 Census: 10,175 people
- Jump to TripAdvisor's Tourism page for Mount Airy <2>
- Peters Creek
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Peters Creek
- Peters Creek is located in Patrick County
- Holly Springs
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Holly Springs
- Holly Springs is located in Surry County (NC)
- Westfield
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Westfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westfield
- Westfield is located in Surry County (NC)
- Jump to TripAdvisor's Tourism page for Westfield <2>
- Dugspur
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Dugspur
- Dugspur is located in Carroll County
- Jump to TripAdvisor's Tourism page for Dugspur <2>
- Stuart
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Stuart
- Stuart is located in Patrick County
- Population from the 2020 Census: 1,261 people
- Jump to TripAdvisor's Tourism page for Stuart <2>
- Lambsburg
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for Lambsburg
- Lambsburg is located in Carroll County
- Jump to TripAdvisor's Tourism page for Lambsburg <2>
- Aarons Corner
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Aarons Corner
- Aarons Corner is located in Stokes County (NC)
- Hillsville
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Hillsville
- Hillsville is located in Carroll County
- Population from the 2020 Census: 2,686 people
- Jump to TripAdvisor's Tourism page for Hillsville <2>
- Drenn
(14 miles [22.5 km] to the west) - Red Brush
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Red Brush
- Red Brush is located in Surry County (NC)
- White Plains
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for White Plains have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Plains
- White Plains is located in Surry County (NC)
- Star
(15 miles [24.1 km] to the northwest)
Off-the-Road Links ...
The official website for Patrick County: www.co.patrick.va.us/
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pilot View Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.6471, Longitude: -80.5187 In this case, the coordinates for the Pilot View Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |