Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hartsock Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hartsock Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hartsock Cemetery. We've listed the following communities based on their distance, with the closest first.
- Grigbys Store
(Less than 2 miles to the north)- Jump to our Gazetteer entry for Grigbys Store
- Grigbys Store is located in Scott County
- Nickelsville
(2 miles [3.2 km] to the southwest)- Jump to our Gazetteer entry for Nickelsville
- Nickelsville is located in Scott County
- Population from the 2020 Census: 362 people
- Jump to TripAdvisor's Tourism page for Nickelsville <2>
- Fugates Hill
(4 miles [6.4 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Fugates Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fugates Hill
- Fugates Hill is located in Russell County
- Dungannon
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Dungannon
- Dungannon is located in Scott County
- Population from the 2020 Census: 299 people
- Mendota
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Mendota
- Mendota is located in Washington County
- Maces Spring
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Maces Spring
- Maces Spring is located in Scott County
- Snowflake
(8 miles [12.9 km] to the southwest) - Willow Springs
(8 miles [12.9 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Willow Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Willow Springs
- Willow Springs is located in Russell County
- Hiltons
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Hiltons
- Hiltons is located in Scott County
- Jump to TripAdvisor's Tourism page for Hiltons <2>
- Leonard
(9 miles [14.5 km] to the southeast) - Bickley Mill
(9 miles [14.5 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Bickley Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bickley Mill
- Bickley Mill is located in Russell County
- Castlewood
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Castlewood
- Castlewood is located in Russell County
- Jump to TripAdvisor's Tourism page for Castlewood <2>
- Saint Paul
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Saint Paul
- Saint Paul is located in Wise County
- Population from the 2020 Census: 847 people
- Jump to TripAdvisor's Tourism page for Saint Paul <2>
- Dwina
(9 miles [14.5 km] to the north)- Jump to our Gazetteer entry for Dwina
- Dwina is located in Wise County
- Creswell
(10 miles [16.1 km] to the east) - Dickensonville
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Dickensonville
- Dickensonville is located in Russell County
- Virginia City
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for Virginia City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Virginia City
- Virginia City is located in Wise County
- Benhams
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Benhams
- Benhams is located in Washington County
- Fort Blackmore
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Fort Blackmore
- Fort Blackmore is located in Scott County
- Jump to TripAdvisor's Tourism page for Fort Blackmore <2>
- Coeburn
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Coeburn
- Coeburn is located in Wise County
- Population from the 2020 Census: 1,835 people
- Jump to TripAdvisor's Tourism page for Coeburn <2>
- Craigs Mill
(12 miles [19.3 km] to the east)- Jump to our Gazetteer entry for Craigs Mill
- Craigs Mill is located in Washington County
- Lano
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Lano
- Lano is located in Scott County
- Mill Point
(13 miles [20.9 km] to the south)- Jump to our Gazetteer entry for Mill Point
- Mill Point is located in Sullivan County (TN)
- Estimated population in 2014: 11,080 people
- Three Springs
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Three Springs
- Three Springs is located in Washington County
- Burson Place
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Burson Place
- Burson Place is located in Washington County
- Carterton
(13 miles [20.9 km] to the northeast)
Off-the-Road Links ...
The official website for Scott County: www.scottcountyva.com/
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hartsock Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.7773, Longitude: -82.3879 In this case, the coordinates for the Hartsock Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |