|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Breeding Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Breeding Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Breeding Cemetery. We've listed the following communities based on their distance, with the closest first.
- Leemaster
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for Leemaster
- Leemaster is located in Buchanan County
- Council
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Council
- Council is located in Buchanan County
- Rowe
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rowe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rowe
- Rowe is located in Buchanan County
- Vansant
(6 miles [9.7 km] to the north)
- Bucu
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Bucu
- Bucu is located in Dickenson County
- Russell
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Russell
- Russell is located in Russell County
- Mavisdale
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Mavisdale
- Mavisdale is located in Buchanan County
- Janey
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Janey
- Janey is located in Buchanan County
- Carrie
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Carrie. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Carrie
- Carrie is located in Dickenson County
- Royal City
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Royal City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Royal City
- Royal City is located in Buchanan County
- Grundy
(9 miles [14.5 km] to the north)
- Aily
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Aily. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Aily
- Aily is located in Dickenson County
- Artrip
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Artrip. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Artrip
- Artrip is located in Russell County
- Honaker
(11 miles [17.7 km] to the southeast)
- Dye
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Dye
- Dye is located in Russell County
- Haysi
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Haysi have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haysi
- Haysi is located in Dickenson County
- Population from the 2020 Census: 460 people
- Jump to TripAdvisor's Tourism page for Haysi <3>
- Nora
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Nora
- Nora is located in Dickenson County
- Cleveland
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Russell County
- Population from the 2020 Census: 170 people
- Red Ash
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Red Ash. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Red Ash
- Red Ash is located in Tazewell County
- Tarpon
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Tarpon. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Tarpon
- Tarpon is located in Dickenson County
- Clinchco
(13 miles [20.9 km] to the west)
- Dante
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Dante
- Dante is located in Russell County
- Kiser ‑ Historic
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Kiser have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kiser
- Kiser is located in Russell County
- Raven
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Raven
- Raven is located in Tazewell County
- Matney
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Matney. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Matney
- Matney is located in Buchanan County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Breeding Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.1357, Longitude: -82.1124 In this case, the coordinates for the Breeding Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|