|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Barnett had a post office and no railroad service.
The following communities are listed based on their distance from Barnett, with the one closest to Barnett listed first.
- Elk Garden
(Less than 2 miles to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Elk Garden. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elk Garden
- Elk Garden is located in Russell County
- Google driving directions:
- From your current location to Elk Garden
- From Barnett to Elk Garden
- Rockdell
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockdell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockdell
- Rockdell is located in Russell County
- Lebanon
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Russell County
- Population from the 2020 Census: 3,184 people
- Jump to TripAdvisor's Tourism page for Lebanon <4>
- Rosedale
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Rosedale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosedale
- Rosedale is located in Russell County
- Honaker
(6 miles [9.7 km] to the north)
- Artrip
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Artrip. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Artrip
- Artrip is located in Russell County
- Google driving directions:
- From your current location to Artrip
- From Barnett to Artrip
- Brumley Gap
(8 miles [12.9 km] to the south)
- Cleveland
(8 miles [12.9 km] to the west)
- Lindell
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Lindell. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lindell
- Lindell is located in Washington County
- Google driving directions:
- From your current location to Lindell
- From Barnett to Lindell
- Belfast
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Belfast have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Russell County
- Swords Creek
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Swords Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swords Creek
- Swords Creek is located in Russell County
- Jump to TripAdvisor's Tourism page for Swords Creek <4>
- Jessees Mill
(9 miles [14.5 km] to the west)
- Hansonville
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Hansonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hansonville
- Hansonville is located in Russell County
- Lowland
(10 miles [16.1 km] to the south)
- Glenford
(10 miles [16.1 km] to the southeast)
- Holston
(11 miles [17.7 km] to the southwest)
- Shortsville
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Shortsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shortsville
- Shortsville is located in Washington County
- Clifton
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Russell County
- Hawkins Mill
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hawkins Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hawkins Mill
- Hawkins Mill is located in Russell County
- Greendale
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Greendale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Greendale
- Greendale is located in Washington County
- Google driving directions:
- From your current location to Greendale
- From Barnett to Greendale
- Counts
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Counts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Counts
- Counts is located in Russell County
- Carterton
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Carterton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Carterton
- Carterton is located in Russell County
- Google driving directions:
- From your current location to Carterton
- From Barnett to Carterton
- Dickensonville
(13 miles [20.9 km] to the southwest)
- Creswell
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Creswell. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Creswell
- Creswell is located in Russell County
- Google driving directions:
- From your current location to Creswell
- From Barnett to Creswell
- Bolton
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bolton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bolton
- Bolton is located in Russell County
- Meadowview
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Meadowview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meadowview
- Meadowview is located in Washington County
- Jump to TripAdvisor's Tourism page for Meadowview <4>
- Emory
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Emory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emory
- Emory is located in Washington County
- Jump to TripAdvisor's Tourism page for Emory <4>
- Saltville
(13 miles [20.9 km] to the east)
- Duty
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Duty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duty
- Duty is located in Buchanan County
Off-the-Road Links ...
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Barnett, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|