RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Hardin County >> Pollards Mill >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Tennessee


The Commemorative Quarter for Tennessee







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Pollards Mill, we use the following websites to find information relevant to Pollards Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Pollards Mill:
    • 35.047862, -88.097813
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Pollards Mill
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Pollards Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Big Ivy
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Big Ivy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Big Ivy
    • Big Ivy is located in Hardin County
  • Center Star
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Center Star have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Star
    • Center Star is located in Hardin County
  • Cooks Landing
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cooks Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cooks Landing
    • Cooks Landing is located in Tishomingo County (MS)
  • Haddock ‑ Historic
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Haddock have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haddock
    • Haddock is located in Lauderdale County (AL)
  • High Point
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for High Point have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for High Point
    • High Point is located in Tishomingo County (MS)
  • Holiday Hills
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Holiday Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holiday Hills
    • Holiday Hills is located in Hardin County
  • Pickwick Ferry
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Pickwick Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pickwick Ferry
    • Pickwick Ferry is located in Hardin County
  • Ransom Stand
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Ransom Stand have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ransom Stand
    • Ransom Stand is located in Wayne County
  • Red Sulphur Springs
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Red Sulphur Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Red Sulphur Springs
    • Red Sulphur Springs is located in Hardin County
  • Continue List   (6 more) ...
    • Sand Mountain ‑ Historic
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sand Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sand Mountain
      • Sand Mountain is located in Hardin County
    • Short
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Short have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Short
      • Short is located in Tishomingo County (MS)
    • Slab Town ‑ Historic
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Slab Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Slab Town
      • Slab Town is located in Hardin County
    • Stout
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Stout have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stout
      • Stout is located in Wayne County
    • Tucker Landing
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Tucker Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tucker Landing
      • Tucker Landing is located in Hardin County
    • Walnut Grove ‑ Historic
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Walnut Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walnut Grove
      • Walnut Grove is located in Hardin County

How Far From Pollards Mill to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Pollards Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Pollards Mill and extending to:

  • Savannah, which is the Seat of Hardin County, lies 14 miles [22.5 km]<2> to the northwest. If you could walk a straight line from Pollards Mill to Savannah, with an average speed<3> of 2.2 miles [3.5 km] per hour, it would take most of a day to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take four to five hours.
  • Nashville, which is the State Capital of Tennessee, lies 106 miles [170.6 km] to the northeast (NE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than two hours, a buggy would take 5 days and walking would take 6 days.
  • The White House (Washington, DC) is 664 miles [1,068.6 km] to the east northeast (ENE). Driving would take just about two full days, a buggy would take 26 days and walking would take 38 days.
  • The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,531 miles [10,510.6 km] and it lies to the northeast (NE).<5>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,249 miles [11,666.1 km] and it lies to the northeast (NE).<6>
  • The distance to Saint Peter's Basilica (The Vatican) is 5,124 miles [8,246.3 km] and it lies to the northeast (NE).<7>

Unfortunately, we don't know of a website for Pollards Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Pollards Mill) to Point B.Our distance measurements begin at a specific point in Pollards Mill. The point we use is located at these GPS coordinates - Latitude: 35.0479, Longitude: -88.0978       In this case, the coordinates for Pollards Mill have been provided by the Geographic Names Information System (GNIS).
<3>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<4>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Pollards Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<5>The calculated bearing (or angle) to Jerusalem is 314.559 degrees.
<6>The calculated bearing (or angle) to Mecca is 310.518 degrees.
<7>The calculated bearing (or angle) to the Vatican is 310.504 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024