Welcome to Mitchellville ...
The city of Mitchellville is located in Sumner County<1>.
While we don't have a date for the founding of Mitchellville, you might get a feel for it by knowing that the earliest mention that we've found (so far) was in a book dated 1895.
From the Census Estimates for 2019, Mitchellville has a population of 194 people<2> (see below for details).
Mitchellville is 770 feet [235 m] above sea level.<3>.
Time Zone: Mitchellville lies in the Central Time Zone (CST/CDT) and observes daylight saving time
Area Codes for Mitchellville: 615 & 629<4>
Population Details ...
Taken from the 2019 Census Estimates, Mitchellville had an population of 194 people. This is an increase of 2.65% since the 2010 Census (or a decrease of 6.28% since the 2000 Census).
At the time of the 2010 Census, Mitchellville had a population of 189 people. This makes Mitchellville the county's 5th most populous community.
With a 2010 count of 189 people, the population of Mitchellville decreased 8.7% from the 2000 Census (which had a count of 207 people).
More information can be found on the Census Page for Mitchellville.
Communities Also Named Mitchellville ...
Using our Gazetteer, we found that there are 10 communities that are also named Mitchellville - they are located in Alabama, Arkansas, Indiana, Iowa, Kansas (2), Maryland, Missouri, Ontario and South Carolina.
For more information, see our Tidbits & Trivia Page for Mitchellville.
Communities near Mitchellville ...
We have created a list of 10 communities that are near Mitchellville.
- Gallatin
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Gallatin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gallatin
- Gallatin is located in Sumner County
- Population from the 2020 Census: 44,335 people
- Jump to TripAdvisor's Tourism page for Gallatin <6>
- White House
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for White House have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White House
- White House is located in Robertson County
- Population from the 2020 Census: 12,975 people
- Jump to TripAdvisor's Tourism page for White House <6>
- Franklin
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Franklin
- Franklin is located in Simpson County (KY)
- Population from the 2020 Census: 9,046 people
- Jump to TripAdvisor's Tourism page for Franklin <6>
- Google driving directions:
- From your current location to Franklin
- From Mitchellville to Franklin
- Millersville
(18 miles [29 km] to the southwest)- Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millersville
- Millersville is located in Sumner County
- Population from the 2020 Census: 6,798 people
- Jump to TripAdvisor's Tourism page for Millersville <6>
- Shackle Island
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Shackle Island have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shackle Island
- Shackle Island is located in Sumner County
- Population from the 2010 Census: 2,844 people
- Westmoreland
(17 miles [27.4 km] to the east)- Note: The GPS coordinates that we are using for Westmoreland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westmoreland
- Westmoreland is located in Sumner County
- Population from the 2020 Census: 2,429 people
- Jump to TripAdvisor's Tourism page for Westmoreland <6>
- Hall Town
(8 miles [12.9 km] to the south) - Cross Plains
(10 miles [16.1 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Cross Plains. Although the coordinates have been estimated, they should be in the vicinity.<7>
- Jump to our Gazetteer entry for Cross Plains
- Cross Plains is located in Robertson County
- Population from the 2020 Census: 1,839 people
- Jump to TripAdvisor's Tourism page for Cross Plains <6>
- Google driving directions:
- From your current location to Cross Plains
- From Mitchellville to Cross Plains
- Auburn
(18 miles [29 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Auburn. Although the coordinates have been estimated, they should be in the vicinity.<7>
- Jump to our Gazetteer entry for Auburn
- Auburn is located in Logan County (KY)
- Population from the 2020 Census: 1,404 people
- Jump to TripAdvisor's Tourism page for Auburn <6>
- Google driving directions:
- From your current location to Auburn
- From Mitchellville to Auburn
- Ocana
(17 miles [27.4 km] to the south)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Mitchellville. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Mitchellville.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Mitchellville. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Mitchellville.
We also have a detailed list of newspapers that have been published in the area around Mitchellville. See our Newspapers Page for Mitchellville.
TripAdvisor Tourism Pages for Mitchellville ...
Looking for more information about Mitchellville? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Mitchellville, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Mitchellville.
Adding Mitchellville to Our Gazetteer ...
We originally found mention of Mitchellville in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.
From our notes, the earliest published mention we've found for Mitchellville was in the book titled Business Atlas and Shippers' Guide (1895).
For more details, see References and Mentions for Mitchellville.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Mitchellville. If you can help, please contact us through our Feedback Page.
The official website for Sumner County: www.sumnertn.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Tennessee's counties, including Sumner, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | Population counts have been provided by the U.S. Census Bureau. For more detail, please visit our Census Page for Mitchellville. |
| <3> | The elevation is an estimate for the area around Mitchellville - it will be higher in some places and lower in others. |
| <4> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 615 code has been Overlayed with the 629 area code. New phone numbers in the Mitchellville area will be assigned with one of these codes: 615 or 629. As a result, placing a call in the Mitchellville area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <6> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <7> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |