Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Maggies Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Maggies Mill. The following communities are listed based on their distance, with the one closest to Maggies Mill listed first.
- Servilla
(Less than 2 miles to the east)
- Servilla is located in Polk County
- Jump to our Gazetteer entry for Servilla
- Reliance
(3 miles [4.8 km] to the southwest)
- Carlock
(6 miles [9.7 km] to the northwest)
- Carlock is located in McMinn County
- Jump to our Gazetteer entry for Carlock
- Rymers ‑ Historic
(7 miles [11.3 km] to the south)
- Rymers is located in Polk County
- Jump to our Gazetteer entry for Rymers
- Epperson
(7 miles [11.3 km] to the east)
- Epperson is located in Monroe County
- Jump to our Gazetteer entry for Epperson
- Grady
(8 miles [12.9 km] to the north)
- Grady is located in McMinn County
- Jump to our Gazetteer entry for Grady
- Williamsburg
(8 miles [12.9 km] to the north)
- Williamsburg is located in McMinn County
- Jump to our Gazetteer entry for Williamsburg
- Rural Vale
(8 miles [12.9 km] to the northeast)
- Rural Vale is located in Monroe County
- Jump to our Gazetteer entry for Rural Vale
- Mecca
(8 miles [12.9 km] to the north)
- Mecca is located in McMinn County
- Jump to our Gazetteer entry for Mecca
- Turtletown
(9 miles [14.5 km] to the southeast)
- Jalapa
(9 miles [14.5 km] to the northeast)
- Jalapa is located in Monroe County
- Jump to our Gazetteer entry for Jalapa
- Patty
(9 miles [14.5 km] to the west)
- Patty is located in Polk County
- Jump to our Gazetteer entry for Patty
- Coker Creek
(10 miles [16.1 km] to the east)
- Coker Creek is located in Monroe County
- Jump to our Gazetteer entry for Coker Creek
- Luskville
(10 miles [16.1 km] to the west)
- Luskville is located in McMinn County
- Jump to our Gazetteer entry for Luskville
- Benton
(11 miles [17.7 km] to the southwest)
- Nonaburg
(12 miles [19.3 km] to the north)
- Nonaburg is located in McMinn County
- Jump to our Gazetteer entry for Nonaburg
- Parksville
(13 miles [20.9 km] to the southwest)
- Parksville is located in Polk County
- Jump to our Gazetteer entry for Parksville
- Wehutty
(13 miles [20.9 km] to the southeast)
- Wehutty is located in Cherokee County (NC)
- Jump to our Gazetteer entry for Wehutty
- Hiwassee
(13 miles [20.9 km] to the east)
- Hiwassee is located in Cherokee County (NC)
- Jump to our Gazetteer entry for Hiwassee
- Tellico Plains
(13 miles [20.9 km] to the northeast)
- Mount Vernon
(13 miles [20.9 km] to the northeast)
- Mount Vernon is located in Monroe County
- Jump to our Gazetteer entry for Mount Vernon
- Chable ‑ Historic
(14 miles [22.5 km] to the southwest)
- Chable is located in Polk County
- Jump to our Gazetteer entry for Chable
- Ducktown
(14 miles [22.5 km] to the south)
- Ocoee
(15 miles [24.1 km] to the southwest)
- Fetzerton ‑ Historic
(15 miles [24.1 km] to the southwest)
- Fetzerton is located in Polk County
- Jump to our Gazetteer entry for Fetzerton
- Sylco
(15 miles [24.1 km] to the southwest)
- Sylco is located in Polk County
- Jump to our Gazetteer entry for Sylco
- Sanford
(15 miles [24.1 km] to the northwest)
- Sanford is located in McMinn County
- Jump to our Gazetteer entry for Sanford
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Maggies Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |