RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Warren County >> Lawson MillIndex...










Learn About
The Commemorative
Quarter for
Tennessee


The Commemorative Quarter for Tennessee







Welcome to Lawson Mill ...

Lawson Mill is located in Warren County<1>.


The location of Lawson Mill has been provided by the Geographic Names Information System (ie- the GNIS).<2>


A typical abbreviation for Lawson Mill: Lawson Ml. (or less commonly used: Lawson Mll.)

Lawson Mill is 920 feet [280 m] above sea level.<3>.

Time Zone: Lawson Mill lies in the Central Time Zone (CST/CDT) and observes daylight saving time

Note: If you travel east from Lawson Mill (for example, toward Dayton), you will leave Central Time and cross into the Eastern Time Zone (EST/EDT).

Lawson Mill is located in the (931) area code.

Communities Also Named Lawson Mill ...

Using our Gazetteer, we found that there are two Tennessee communities named Lawson Mill: This one is located in Warren County and the other is located in Hancock County.

For more information, see our Tidbits & Trivia Page for Lawson Mill.

Communities near Lawson Mill ...

We have created a list of 10 communities that are near Lawson Mill.

  • Smyrna
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Smyrna have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smyrna
    • Smyrna is located in Warren County
    • Estimated population in 2014: 45,274 people
  • McMinnville
    (4 miles [6.4 km] to the northeast)
  • Manchester
    (18 miles [29 km] to the southwest)
  • Sopha ‑ Historic
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Sopha have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sopha
    • Sopha is located in Van Buren County
    • Estimated population in 2014: 3,104 people
  • Woodbury
    (19 miles [30.6 km] to the northwest)
  • Gruetli
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gruetli have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gruetli
    • Gruetli is located in Grundy County
    • Estimated population in 2014: 1,775 people
  • New Union
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Union
    • New Union is located in Coffee County
    • Population from the 2010 Census: 1,431 people
  • Altamont
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Altamont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Altamont
    • Altamont is located in Grundy County
    • Population from the 2020 Census: 1,055 people
    • Jump to TripAdvisor's Tourism page for Altamont <4>
  • Morrison
    (5 miles [8 km] to the west)
  • Hollow Springs
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hollow Springs
    • Hollow Springs is located in Cannon County
    • Estimated population in 2014: 706 people

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Lawson Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Lawson Mill.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Lawson Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Lawson Mill.

We also have a detailed list of newspapers that have been published in the area around Lawson Mill. See our Newspapers Page for Lawson Mill.

TripAdvisor Tourism Pages for Lawson Mill ...

Looking for more information about Lawson Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Lawson Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Lawson Mill.

Unfortunately, we don't know of a website for Lawson Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>If you're interested in how the shape of Tennessee's counties, including Warren, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>The elevation is an estimate for the area around Lawson Mill - it will be higher in some places and lower in others.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024