Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Fairfield had a population of 46 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Fairfield, with the one closest to Fairfield listed first.
- Wartrace
(3 miles [4.8 km] to the southwest)
- Beechgrove
(4 miles [6.4 km] to the northeast)
- Bell Buckle
(4 miles [6.4 km] to the northwest)
- Haley
(5 miles [8 km] to the south)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Noah
(5 miles [8 km] to the east)
- Noah is located in Coffee County
- Jump to our Gazetteer entry for Noah
- Cortner
(6 miles [9.7 km] to the south)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Gossburg
(7 miles [11.3 km] to the northeast)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Normandy
(8 miles [12.9 km] to the south)
- Fosterville
(8 miles [12.9 km] to the northwest)
- Fosterville is located in Rutherford County
- Jump to our Gazetteer entry for Fosterville
- Singleton
(10 miles [16.1 km] to the southwest)
- Singleton is located in Bedford County
- Jump to our Gazetteer entry for Singleton
- Holly ‑ Historic
(10 miles [16.1 km] to the east)
- Holly is located in Coffee County
- Jump to our Gazetteer entry for Holly
- Shelbyville
(11 miles [17.7 km] to the southwest)
- Teal ‑ Historic
(11 miles [17.7 km] to the east)
- Teal is located in Coffee County
- Jump to our Gazetteer entry for Teal
- Hollow Springs
(11 miles [17.7 km] to the northeast)
- Hollow Springs is located in Cannon County
- Jump to our Gazetteer entry for Hollow Springs
- Estimated population in 2014: 706 people
- Vannatta
(11 miles [17.7 km] to the west)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Manchester
(12 miles [19.3 km] to the southeast)
- Donnell Chapel
(12 miles [19.3 km] to the north)
- Donnell Chapel is located in Rutherford County
- Jump to our Gazetteer entry for Donnell Chapel
- Flat Creek
(13 miles [20.9 km] to the southwest)
- Flat Creek is located in Bedford County
- Jump to our Gazetteer entry for Flat Creek
- Belmont
(13 miles [20.9 km] to the southeast)
- Belmont is located in Coffee County
- Jump to our Gazetteer entry for Belmont
- Bradyville
(13 miles [20.9 km] to the northeast)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Midland
(13 miles [20.9 km] to the northwest)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Tullahoma
(14 miles [22.5 km] to the south)
- Rucker
(14 miles [22.5 km] to the northwest)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Burgen
(14 miles [22.5 km] to the northeast)
- Burgen is located in Cannon County
- Jump to our Gazetteer entry for Burgen
- Longview
(14 miles [22.5 km] to the west)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Fall Creek
(14 miles [22.5 km] to the west)
- Fall Creek is located in Bedford County
- Jump to our Gazetteer entry for Fall Creek
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fairfield, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |