A Gazetteer for the United States and Canada
Census Data for Englewood ...
The most recent Census Estimate<1> was for 2018 and it gave Englewood a population of 1,524 people.
The last Decennial Census<2> was in 2010, which gave Englewood a population of 1,532 people.
The town of Englewood is located in McMinn County. The 2010 Census gave McMinn County a population of 52,266 people. This means that Englewood had 2.93% of the county's total population, making it McMinn's 3rd most populous community.
When the Census Bureau conducts a census for a town like Englewood, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
Things like the population, area and housing for Englewood reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Englewood might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
The 2010 Census shows that the sampling area for Englewood has a total area of 1.82 square miles [4.7 km²].
McMinn County has a land area of 430.1 square miles [1,114 km²]. At 1.82 square miles [4.7 km²], Englewood has 0.42% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
Lat: 35° 25' 21" (or 35.42°) [Map]
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (1,532 people) and land area (1.82 square miles [4.7 km²]) values from the 2010 Census, Englewood had a population density of 842 people per square mile [325.4 people/km²].
In comparison, the 2000 Census shows Englewood had a population of 1,590 people and a land area of 1.7 square miles [4.4 km²]. This gives a population density of 934 people per square mile [360.8 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Englewood. You need to be careful when making such a comparison, the differences are likely to lead to a questionable comparison. More information about the nature of these changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Englewood had 759 Housing Units<3> and with its population of 1,532 people, this averages 2.02 people per Housing Unit.
The 2010 Census shows Englewood had a land area of 1.82 square miles [4.7 km²]. This translates to 417.5 Housing Units per square mile [161.2 housing units/km²].
From the Census of 2000: Englewood had 760 Housing Units, a population of 1,590 people and a land area of 1.7 square miles [4.4 km²]. This gives a density of 2.09 people per Housing Unit and 446.6 Housing Units per square mile [172.4 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Englewood and you need to be careful when comparing values between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
McMinn County ...
The community of Englewood is located in McMinn County.
The county had a population of 52,266 people at the 2010 Census. With it's population of 1,532 people, Englewood represented 2.93% of the county's total.
In addition, where the town of Englewood has a population density of 842 people per square mile [325.4 people/km²], McMinn County averages 121.5 people per square mile [46.92 people/km²].
For more information, please visit our Census Page for McMinn County.
Population Rings for Englewood ...
To help identify the number of people who live in Englewood and the surrounding area, we have drawn concentric rings centered on Englewood. We counted the number of communities within each ring and summed their populations.<4>
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Englewood, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Englewood. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 6.84% larger than the 2000 Census.
The 2010 Census shows that the total area for Englewood was 1.82 square miles [4.7 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 1.7 square miles [4.4 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Englewood, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Englewood.
For the 2010 Census, the location was given as:
Lat: 35.422581° (or 35°25'21" N) [Map]
For the 2000 Census, the location given was:
Lat: 35.426252° (or 35°25'34" N) [Map]
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 1,433 feet to the south<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2406451) to Englewood. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Englewood. The GNIS point has been mapped to the latitude/longitude:
Lat: 35.421921° (or 35°25'18" N) [Map]
The GSP location given for the 2010 Census lies 297.4 feet to the northeast<6> of the point given by the GNIS for Englewood. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Englewood.
Miscellaneous Information for Englewood ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either McMinn County or the town of Englewood:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Englewood:
GNIS ID for Englewood: 2406451
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 47 (Tennessee)
County Code: 107 (McMinn County)
Place Code: 24040 (Englewood)
Misc. Census Codes ...
Englewood is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Englewood.
Other Roadside Stops ...
Off-the-Road Links ...
The official website of the U.S. Census Bureau
Unfortunately, we don't know of a website for Englewood. If you can help, please contact us through our Feedback Page.
The official website for McMinn County: www.mcminncounty.org/
The official website for State of Tennessee: https://www.tn.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 15 Nov 2019