RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Cortners Mill >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Tennessee


The Commemorative Quarter for Tennessee







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Cortners Mill, we use the following websites to find information relevant to Cortners Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Cortners Mill:
    • 35.475075, -86.272493
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Cortners Mill
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Cortners Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Bottle Hollow
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bottle Hollow have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bottle Hollow
    • Bottle Hollow is located in Bedford County
  • Busy Corner
    (7 miles [11.3 km] to the northeast)
    • Jump to our Gazetteer entry for Busy Corner
    • Busy Corner is located in Coffee County
  • Cascade Hollow
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for Cascade Hollow
    • Cascade Hollow is located in Bedford County
  • Flowertown
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Flowertown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flowertown
    • Flowertown is located in Coffee County
  • Normandy
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Normandy
    • Normandy is located in Bedford County
    • Population from the 2020 Census: 140 people
    • Jump to TripAdvisor's Tourism page for Normandy <2>
  • Roseville
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Roseville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roseville
    • Roseville is located in Bedford County
  • Sevenmile Hill
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Sevenmile Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sevenmile Hill
    • Sevenmile Hill is located in Coffee County
  • Union Ridge
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Union Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union Ridge
    • Union Ridge is located in Bedford County
  • Walkersville ‑ Historic
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Walkersville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walkersville
    • Walkersville is located in Coffee County
  • Willow Grove
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Willow Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Willow Grove
    • Willow Grove is located in Bedford County

How Far From Cortners Mill to ...

We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Cortners Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Cortners Mill and extending to:

  • Shelbyville, which is the Seat of Bedford County, lies 10 miles [16.1 km]<3> to the west. If you could walk a straight line from Cortners Mill to Shelbyville, with an average speed<4> of 2.2 miles [3.5 km] per hour, it would take four to five hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take a little over three hours.
  • Nashville, which is the State Capital of Tennessee, lies 55 miles [88.5 km] to the north northwest (NNW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than an hour, a buggy would take over two days and walking would take most of three days.
  • The White House (Washington, DC) is 559 miles [899.6 km] to the east northeast (ENE). Driving would take just over a day, a buggy would take 22 days and walking would take 32 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,436 miles [10,357.7 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,151 miles [11,508.4 km] and it lies to the northeast (NE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 5,027 miles [8,090.2 km] and it lies to the northeast (NE).<8>

Unfortunately, we don't know of a website for Cortners Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Cortners Mill) to Point B.Our distance measurements begin at a specific point in Cortners Mill. The point we use is located at these GPS coordinates - Latitude: 35.4751, Longitude: -86.2725       In this case, the coordinates for Cortners Mill have been provided by the Geographic Names Information System (GNIS).
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Cortners Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 313.455 degrees.
<7>The calculated bearing (or angle) to Mecca is 309.304 degrees.
<8>The calculated bearing (or angle) to the Vatican is 309.638 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024