Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Coran in the Atlas, the following communities of the 1890's would have been found near the current location of Coran. The following communities are listed based on their distance, with the one closest to Coran listed first.
- Austins Mill
(Less than 2 miles to the north)
- Austins Mill is located in Hawkins County
- Jump to our Gazetteer entry for Austins Mill
- Persia
(Less than 2 miles to the south)
- Persia is located in Hawkins County
- Jump to our Gazetteer entry for Persia
- Otes
(3 miles [4.8 km] to the south)
- Otes is located in Hawkins County
- Jump to our Gazetteer entry for Otes
- Strahl
(3 miles [4.8 km] to the east)
- Strahl is located in Hawkins County
- Jump to our Gazetteer entry for Strahl
- Rogersville
(3 miles [4.8 km] to the north)
- Saint Clair
(4 miles [6.4 km] to the southwest)
- Saint Clair is located in Hawkins County
- Jump to our Gazetteer entry for Saint Clair
- White Horn
(5 miles [8 km] to the southwest)
- White Horn is located in Hawkins County
- Jump to our Gazetteer entry for White Horn
- Amis
(5 miles [8 km] to the northeast)
- Amis is located in Hawkins County
- Jump to our Gazetteer entry for Amis
- Choptack
(5 miles [8 km] to the northwest)
- Choptack is located in Hawkins County
- Jump to our Gazetteer entry for Choptack
- Pilot Knob
(6 miles [9.7 km] to the south)
- Pilot Knob is located in Greene County
- Jump to our Gazetteer entry for Pilot Knob
- Romeo
(6 miles [9.7 km] to the southeast)
- Romeo is located in Greene County
- Jump to our Gazetteer entry for Romeo
- Bulls Gap
(7 miles [11.3 km] to the southwest)
- Marvin
(7 miles [11.3 km] to the south)
- Marvin is located in Greene County
- Jump to our Gazetteer entry for Marvin
- Morelock ‑ Historic
(7 miles [11.3 km] to the southeast)
- Morelock is located in Greene County
- Jump to our Gazetteer entry for Morelock
- Alumwell
(8 miles [12.9 km] to the north)
- Alumwell is located in Hawkins County
- Jump to our Gazetteer entry for Alumwell
- Whitesburg
(9 miles [14.5 km] to the southwest)
- Albany
(9 miles [14.5 km] to the southeast)
- Albany is located in Greene County
- Jump to our Gazetteer entry for Albany
- New Hope
(9 miles [14.5 km] to the east)
- New Hope is located in Hawkins County
- Jump to our Gazetteer entry for New Hope
- Vogel ‑ Historic
(9 miles [14.5 km] to the northeast)
- Vogel is located in Hawkins County
- Jump to our Gazetteer entry for Vogel
- Gillenwater ‑ Historic
(9 miles [14.5 km] to the north)
- Gillenwater is located in Hawkins County
- Jump to our Gazetteer entry for Gillenwater
- Galbraith Springs
(9 miles [14.5 km] to the west)
- Galbraith Springs is located in Hawkins County
- Jump to our Gazetteer entry for Galbraith Springs
- Ottway
(10 miles [16.1 km] to the southeast)
- Ottway is located in Greene County
- Jump to our Gazetteer entry for Ottway
- Lee Valley
(10 miles [16.1 km] to the northwest)
- Lee Valley is located in Hawkins County
- Jump to our Gazetteer entry for Lee Valley
- Eidson
(10 miles [16.1 km] to the north)
- Eidson is located in Hawkins County
- Jump to our Gazetteer entry for Eidson
- Mohawk
(11 miles [17.7 km] to the south)
- Mohawk is located in Greene County
- Jump to our Gazetteer entry for Mohawk
- Mosheim
(11 miles [17.7 km] to the south)
- Van Hill
(11 miles [17.7 km] to the east)
- Van Hill is located in Hawkins County
- Jump to our Gazetteer entry for Van Hill
- Surgoinsville
(11 miles [17.7 km] to the northeast)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Coran, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |