RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Monroe County >> Conasauga Mill >> Tidbits & TriviaIndex...

Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Conasauga Mill, we use the following websites to find information relevant to Conasauga Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Conasauga Mill:
    • 35.310354, -84.356868
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • Open the Heavens-Above website centered on Conasauga Mill
  • Bird Watching ...
    • We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
    • The eBird website is organized on a county-by-county basis. We have selected Monroe County as the starting point when you click on the link below:
    • Open the eBird sighting report for Monroe County
    • Since Conasauga Mill is near McMinn County and also Polk County, we have provided a link to their eBird sighting reports:
    • Open the eBird sighting report for McMinn County
    • Open the eBird sighting report for Polk County
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Open the Waymark.com report for Conasauga Mill

Curious and Interesting Names Near Conasauga Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Bullet Creek
    (4 miles [6.4 km] to the southwest)
    • Bullet Creek is located in Monroe County
    • Jump to our Gazetteer entry for Bullet Creek
  • Coker Creek
    (5 miles [8 km] to the southeast)
    • Coker Creek is located in Monroe County
    • Jump to our Gazetteer entry for Coker Creek
  • Ebenezer
    (5 miles [8 km] to the north)
    • Ebenezer is located in Monroe County
    • Jump to our Gazetteer entry for Ebenezer
  • Holly Springs
    (2 miles [3.2 km] to the southwest)
    • Holly Springs is located in Monroe County
    • Jump to our Gazetteer entry for Holly Springs
  • Ironsburg
    (5 miles [8 km] to the south)
    • Ironsburg is located in Monroe County
    • Jump to our Gazetteer entry for Ironsburg
  • Ivy
    (4 miles [6.4 km] to the southwest)
    • Ivy is located in Monroe County
    • Jump to our Gazetteer entry for Ivy
  • Jacktown
    (5 miles [8 km] to the northeast)
    • Jacktown is located in Monroe County
    • Jump to our Gazetteer entry for Jacktown
    • Estimated population in 2014: 67,319 people
  • Liberty Hill
    (6 miles [9.7 km] to the northwest)
    • Liberty Hill is located in McMinn County
    • Jump to our Gazetteer entry for Liberty Hill
  • Mount Harmony
    (4 miles [6.4 km] to the north)
    • Mount Harmony is located in Monroe County
    • Jump to our Gazetteer entry for Mount Harmony
  • Prospect
    (5 miles [8 km] to the northwest)
    • Prospect is located in McMinn County
    • Jump to our Gazetteer entry for Prospect
  • Rural Vale
    (Less than 2 miles to the northwest)
    • Rural Vale is located in Monroe County
    • Jump to our Gazetteer entry for Rural Vale
  • Sandy Lane
    (4 miles [6.4 km] to the east)
    • Sandy Lane is located in Monroe County
    • Jump to our Gazetteer entry for Sandy Lane

How Far From Conasauga Mill to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Conasauga Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<1> beginning in Conasauga Mill and extending to:

  • Madisonville, which is the Seat of Monroe County, lies 14 miles [22.5 km]<1> to the north. If you could walk a straight line from Conasauga Mill to Madisonville, with an average speed<2> of 2.2 miles [3.5 km] per hour, it would take most of a day to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take four to five hours.
  • Nashville, which is the State Capital of Tennessee, lies 147 miles [236.6 km] to the west northwest (WNW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than three hours, a buggy would take 6 days and walking would take 9 days.
  • The White House (Washington, DC) is 472 miles [759.6 km] to the east northeast (ENE). Driving would take most of a day, a buggy would take 19 days and walking would take 27 days.
  • The shortest distance<3> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,365 miles [10,243.5 km] and it lies to the northeast (NE).<4>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,074 miles [11,384.5 km] and it lies to the northeast (NE).<5>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,950 miles [7,966.3 km] and it lies to the northeast (NE).<6>'

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Conasauga Mill) to Point B. In other words: 'As the crow flies'.
<2>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<3>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Conasauga Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.Our distance measurements begin at a specific point in Conasauga Mill. The point we use is located at these GPS coordinates - Latitude: 35.3104, Longitude: -84.3569       In this case, the coordinates for Conasauga Mill have been provided by the Geographic Names Information System (GNIS).
<4>The calculated bearing (or angle) to Jerusalem is 312.29 degrees.
<5>The calculated bearing (or angle) to Mecca is 307.94 degrees.
<6>The calculated bearing (or angle) to the Vatican is 308.885 degrees.